.png)
Français (Canada)
FLEXSTYLE® BY STAHLS' CUSTOM EMBLEMS
Emblem Overview
Offer your customers a unique, cutting-edge look and feel with these versatile premium embossed emblems. They're great for everything from promotional and recognition hard goods to corporate wear and sports jerseys. Choose from the following emblem options:
- Beveled - Beveled edges for a sharp, refined look
- Domed - Shiny finish with 3D bubble effect
- Flat - Shiny 3D finish with a "flatter" appearance (Hook & Loop backing available)
- Textured - Detailed colour and textures
- Holographic - Two images in one logo with lenticular effect
Image slider
Benefits at a Glance
Emblem/Patch Specifications
Application Instructions
Hotronix® 360 IQ® Hat Press| Time: | 20-30 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | 1/8" Foam Pad |
Cap Press| Time: | 20-30 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | FlexStyle® Silicone Pad
|
| Instructions: | For first application, pre-heat the lower platen for 60 seconds. Load cap and pre-heat 20 seconds. Cover with Flex Pad and press. |
Heated Upper Platen| Time: | 15-20 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | FlexStyle® Silicone Pad
|
| Instructions: | Pre-heat bottom platen for 60 seconds and fabric for 15-20 seconds. |
Heated Lower Platen| Time: | 12-15 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | FlexStyle® Silicone Pad |
Heat Application NoteIf substituting the 1/8" Foam Pad for the FlexStyle® Silicone Pad, please add 5-10 seconds dwell time.
Care Instructions & WashabilityFlexStyle Emblems will withstand at least 25 domestic washing cycles. Machine wash cold.
Pressure Sensitive (Sticker) Application Instructions- Make sure the application area is thoroughly cleaned. Rubbing alcohol can be used.
- Remove paper backing and press firmly on the desired location.
- For best results, please allow at least 24 hours cure time.
Additional InformationFor use on smooth, hard surfaces. Not recommended for surfaces that may contain an oil finish such as silicone or any type of outdoor goods.
Educational Videos
Create Custom Holographic Patches and Emblems
Uploaded on Oct 30, 2023
Get creative with NEW Holographic Flexstyle emblems from STAHLS! Now available as an option on Flexstyle® Custom Emblems.
Uploaded on Oct 30, 2023
Get creative with NEW Holographic Flexstyle emblems from STAHLS! Now available as an option on Flexstyle® Custom Emblems.
Easily Create a Custom Hats Design with Emblem Patches and One Touch Caps
Uploaded on Jun 26, 2020
When it comes to applying a custom design to hats like the One Touch Cap it's safe to say that it can be challenging, but rewarding when done properly. In this video Josh Ellsworth is going to walk you through how combining the Hotronix® 360 IQ Hat Heat Press and FlexStyle® custom emblems can make decorating hats like this one fast and easy for anyone!
Uploaded on Jun 26, 2020
When it comes to applying a custom design to hats like the One Touch Cap it's safe to say that it can be challenging, but rewarding when done properly. In this video Josh Ellsworth is going to walk you through how combining the Hotronix® 360 IQ Hat Heat Press and FlexStyle® custom emblems can make decorating hats like this one fast and easy for anyone!
FLEXSTYLE® BY STAHLS' CUSTOM EMBLEMS
Premium 3D Embellishment
Emblem Overview
Offer your customers a unique, cutting-edge look and feel with these versatile premium embossed emblems. They're great for everything from promotional and recognition hard goods to corporate wear and sports jerseys. Choose from the following emblem options:
- Beveled - Beveled edges for a sharp, refined look
- Domed - Shiny finish with 3D bubble effect
- Flat - Shiny 3D finish with a "flatter" appearance (Hook & Loop backing available)
- Textured - Detailed colour and textures
- Holographic - Two images in one logo with lenticular effect
Image slider
Emblem/Patch Specifications
Benefits at a Glance
Application Instructions
Hotronix® 360 IQ® Hat Press| Time: | 20-30 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | 1/8" Foam Pad |
Cap Press| Time: | 20-30 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | FlexStyle® Silicone Pad
|
| Instructions: | For first application, pre-heat the lower platen for 60 seconds. Load cap and pre-heat 20 seconds. Cover with Flex Pad and press. |
Heated Upper Platen| Time: | 15-20 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | FlexStyle® Silicone Pad
|
| Instructions: | Pre-heat bottom platen for 60 seconds and fabric for 15-20 seconds. |
Heated Lower Platen| Time: | 12-15 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Cold |
| Cover Sheet: | FlexStyle® Silicone Pad |
Heat Application NoteIf substituting the 1/8" Foam Pad for the FlexStyle® Silicone Pad, please add 5-10 seconds dwell time.
Care Instructions & WashabilityFlexStyle Emblems will withstand at least 25 domestic washing cycles. Machine wash cold.
Pressure Sensitive (Sticker) Application Instructions- Make sure the application area is thoroughly cleaned. Rubbing alcohol can be used.
- Remove paper backing and press firmly on the desired location.
- For best results, please allow at least 24 hours cure time.
Additional InformationFor use on smooth, hard surfaces. Not recommended for surfaces that may contain an oil finish such as silicone or any type of outdoor goods.
Educational Videos
Create Custom Holographic Patches and Emblems
Uploaded on Oct 30, 2023
Get creative with NEW Holographic Flexstyle emblems from STAHLS! Now available as an option on Flexstyle® Custom Emblems.
Uploaded on Oct 30, 2023
Get creative with NEW Holographic Flexstyle emblems from STAHLS! Now available as an option on Flexstyle® Custom Emblems.
Easily Create a Custom Hats Design with Emblem Patches and One Touch Caps
Uploaded on Jun 26, 2020
When it comes to applying a custom design to hats like the One Touch Cap it's safe to say that it can be challenging, but rewarding when done properly. In this video Josh Ellsworth is going to walk you through how combining the Hotronix® 360 IQ Hat Heat Press and FlexStyle® custom emblems can make decorating hats like this one fast and easy for anyone!
Uploaded on Jun 26, 2020
When it comes to applying a custom design to hats like the One Touch Cap it's safe to say that it can be challenging, but rewarding when done properly. In this video Josh Ellsworth is going to walk you through how combining the Hotronix® 360 IQ Hat Heat Press and FlexStyle® custom emblems can make decorating hats like this one fast and easy for anyone!