.png)
Français (Canada)
GENUINE LEATHER SHEETS
Material Overview
Create custom genuine leather patches for any customer with your laser engraver. Available in three colour options, Genuine Leather Sheets have adhesive pre-applied on the back for easy heat application after engraving and cutting. Bring your customer’s designs to life with a rugged, yet refined look.
Note: Due to the nature of genuine animal leather, some sheets may have imperfections such as tears, holes, or colour variation, which are inherent characteristics of the material.
- Thickness: 1.5mm
- For high volume orders, consider custom-cut Genuine Leather Patches
- Genuine Leather is not intended for garments requiring laundering or dry cleaning, for garments requiring laundering see Faux Leather Sheets
Note: Due to the nature of genuine animal leather, some sheets may have imperfections such as tears, holes, or colour variation, which are inherent characteristics of the material.
Image slider
Benefits at a Glance
Application Instructions
Hotronix® 360 IQ™ Hat Press | Time: | 20-30 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Cover Sheet: | 1/8" Foam Pad |
Heated Upper Platen | Time: | 20 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Cover Sheet: | FlexStyle Silicone or 1/8" Foam Pad |
| Instructions: | Pre-heat bottom platen for 60 seconds and fabric for 20 seconds. |
Heated Lower Platen | Time: | 20-30 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Cover Sheet: | FlexStyle Silicone or 1/8" Foam Pad |
Cap Press| Time: | 20-30 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Cover Sheet: | FlexStyle Silicone or 1/8" Foam Pad |
| Instructions: | Pre-heat the lower platen for 60 seconds. Load cap and pre-heat 20 seconds. Cover with Flex Pad and press. |
Special Notes For best results, Stahls' recommends applying with a heated lower platen. On a Hotronix Heat Press, the pressure will come to a 7 when using a silicone pad.
Washability/Care Instructions Genuine Leather Sheets are not intended to be used on goods that require washing or dry cleaning.
Laser Engraver/Cutter Instructions | Caramel High Contrast | ||
|---|---|---|
| Process | Engrave | Cut |
| Power | 75 | 40 |
| Speed | 80 | 0.85 |
| Force (PP/Hz) | 980 | 4750 |
| Passes | 1 | 2 |
| Offset | 3.75 | 0 |
| Natural High Contrast | ||
|---|---|---|
| Process | Engrave | Cut |
| Power | 76 | 48 |
| Speed | 83 | 0.7 |
| Force (PP/Hz) | 850 | 5000 |
| Passes | 1 | 2 |
| Offset | 3.5 | 0 |
| Taupe High Contrast | ||
|---|---|---|
| Process | Engrave | Cut |
| Power | 73 | 30 |
| Speed | 78 | 0.8 |
| Force (PP/Hz) | 950 | 5000 |
| Passes | 1 | 2 |
| Offset | 4.5 | 0 |
Note: Every laser is different, please determine what setting to use based on your equipment. Always test cut prior to production.
GENUINE LEATHER SHEETS
Create Custom Genuine Leather Patches With Your Laser Engraver/Cutter
Material Overview
Create custom genuine leather patches for any customer with your laser engraver. Available in three colour options, Genuine Leather Sheets have adhesive pre-applied on the back for easy heat application after engraving and cutting. Bring your customer’s designs to life with a rugged, yet refined look.
Note: Due to the nature of genuine animal leather, some sheets may have imperfections such as tears, holes, or colour variation, which are inherent characteristics of the material.
- Thickness: 1.5mm
- For high volume orders, consider custom-cut Genuine Leather Patches
- Genuine Leather is not intended for garments requiring laundering or dry cleaning, for garments requiring laundering see Faux Leather Sheets
Note: Due to the nature of genuine animal leather, some sheets may have imperfections such as tears, holes, or colour variation, which are inherent characteristics of the material.
Image slider
Benefits at a Glance
Application Instructions
Hotronix® 360 IQ™ Hat Press | Time: | 20-30 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Cover Sheet: | 1/8" Foam Pad |
Heated Upper Platen | Time: | 20 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Cover Sheet: | FlexStyle Silicone or 1/8" Foam Pad |
| Instructions: | Pre-heat bottom platen for 60 seconds and fabric for 20 seconds. |
Heated Lower Platen | Time: | 20-30 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Cover Sheet: | FlexStyle Silicone or 1/8" Foam Pad |
Cap Press| Time: | 20-30 seconds |
| Temperature: | 360°F |
| Pressure: | Medium |
| Cover Sheet: | FlexStyle Silicone or 1/8" Foam Pad |
| Instructions: | Pre-heat the lower platen for 60 seconds. Load cap and pre-heat 20 seconds. Cover with Flex Pad and press. |
Special Notes For best results, Stahls' recommends applying with a heated lower platen. On a Hotronix Heat Press, the pressure will come to a 7 when using a silicone pad.
Washability/Care Instructions Genuine Leather Sheets are not intended to be used on goods that require washing or dry cleaning.
Laser Engraver/Cutter Instructions | Leather Type | Process | Power | Speed | Force (PP/Hz) | Passes | Offset |
|---|---|---|---|---|---|---|
| Caramel High | Engrave | 75 | 80 | 980 | 1 | 3.75 |
| Caramel High | Cut | 40 | 0.85 | 4750 | 2 | 0 |
| Natural High | Engrave | 76 | 83 | 850 | 1 | 3.5 |
| Natural High | Cut | 48 | 0.7 | 5000 | 2 | 0 |
| Taupe High | Engrave | 73 | 78 | 950 | 1 | 4.5 |
| Taupe High | Cut | 30 | 0.8 | 5000 | 2 | 0 |
Note: Every laser is different, please determine what setting to use based on your equipment. Always test cut prior to production.