.png)
Français (Canada)
CAD-CUT® ADHESIVE
Material Overview
Heat transfer foils are known for being short-term embellishments when added to transfer papers and plastisol inks. This heat transfer foil adhesive solves that problem, permanently binding the foil, giving foil-embellished designs a long life. Laser cutter compatible.
Use with Stahls' Heat Transfer Foil to create eye-catching designs.
Create a design from our library of CAD-CUT® Templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive
Use with Stahls' Heat Transfer Foil to create eye-catching designs.
Create a design from our library of CAD-CUT® Templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive
Benefits at a Glance
Application Instructions
Adhesive Application | Time: | 3-5 Seconds |
| Temperature: | 300°F / 149°C |
| Pressure: | Light |
| Peel: | Hot |
Foil Application| Time: | 8-10 |
| Temperature: | 300°F / 149°C |
| Pressure: | Firm |
| Peel: | Cold |
Print/Cut Instructions- Cut design from CAD-CUT® Adhesive, with adhesive side facing up
- Weed away excess material and follow Adhesive application instructions
- With colored side facing up, lay a slightly larger piece of Foil over applied design
- Use a cover sheet and follow Foil application instructions
- Once peeled, Foil adheres to the Adhesive only
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Graphtec | 45° | 7-9 | 0 | 20 cm/s |
| Roland GS-24 | 45° | 60-80g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Educational Videos
How to Heat Press: CAD-CUT® Adhesive & Foil
Uploaded on Jul 29, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Adhesive and Heat Transfer Foil to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Uploaded on Jul 29, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Adhesive and Heat Transfer Foil to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Top 3 Reasons to Buy: CAD-CUT® Adhesive with Heat Transfer Foil
Uploaded on Apr 16, 2021
Learn about one of the best heat transfer combos on the market in CAD-CUT® Adhesive vinyl and Heat Transfer Foil. These two products work great together and make it very easy to add a special effect look on to your garments. Watch as Josh highlights the top 3 reasons why you should consider these products and how they can best be used for your business.
Uploaded on Apr 16, 2021
Learn about one of the best heat transfer combos on the market in CAD-CUT® Adhesive vinyl and Heat Transfer Foil. These two products work great together and make it very easy to add a special effect look on to your garments. Watch as Josh highlights the top 3 reasons why you should consider these products and how they can best be used for your business.
CAD-CUT® ADHESIVE
For Long-Lasting Foil Embellishments
Material Overview
Heat transfer foils are known for being short-term embellishments when added to transfer papers and plastisol inks. This heat transfer foil adhesive solves that problem, permanently binding the foil, giving foil-embellished designs a long life. Laser cutter compatible.
Use with Stahls' Heat Transfer Foil to create eye-catching designs.
Create a design from our library of CAD-CUT® Templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive
Use with Stahls' Heat Transfer Foil to create eye-catching designs.
Create a design from our library of CAD-CUT® Templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive
Benefits at a Glance
Application Instructions
Adhesive Application | Time: | 3-5 Seconds |
| Temperature: | 300°F / 149°C |
| Pressure: | Light |
| Peel: | Hot |
Foil Application| Time: | 8-10 |
| Temperature: | 300°F / 149°C |
| Pressure: | Firm |
| Peel: | Cold |
Print/Cut Instructions- Cut design from CAD-CUT® Adhesive, with adhesive side facing up
- Weed away excess material and follow Adhesive application instructions
- With colored side facing up, lay a slightly larger piece of Foil over applied design
- Use a cover sheet and follow Foil application instructions
- Once peeled, Foil adheres to the Adhesive only
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Graphtec | 45° | 7-9 | 0 | 20 cm/s |
| Roland GS-24 | 45° | 60-80g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Educational Videos
How to Heat Press: CAD-CUT® Adhesive & Foil
Uploaded on Jul 29, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Adhesive and Heat Transfer Foil to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Uploaded on Jul 29, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Adhesive and Heat Transfer Foil to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Top 3 Reasons to Buy: CAD-CUT® Adhesive with Heat Transfer Foil
Uploaded on Apr 16, 2021
Learn about one of the best heat transfer combos on the market in CAD-CUT® Adhesive vinyl and Heat Transfer Foil. These two products work great together and make it very easy to add a special effect look on to your garments. Watch as Josh highlights the top 3 reasons why you should consider these products and how they can best be used for your business.
Uploaded on Apr 16, 2021
Learn about one of the best heat transfer combos on the market in CAD-CUT® Adhesive vinyl and Heat Transfer Foil. These two products work great together and make it very easy to add a special effect look on to your garments. Watch as Josh highlights the top 3 reasons why you should consider these products and how they can best be used for your business.