.png)
Français (Canada)
PERMA-TWILL® TACKLE TWILL HEAT TRANSFER VINYL
Material Overview
Our 100% polyester tackle twill heat transfer material is ideal for large jobs that require the look of appliqué without the sewing. Unless the material is cut with a laser, it will need to be sewn to prevent fraying.
Use Magic Mask® High Tack as a carrier to stabilize the material when cutting with a vinyl cutter.
Use Magic Mask® High Tack as a carrier to stabilize the material when cutting with a vinyl cutter.
- Features a permanent adhesive
- Must be sewn to prevent fraying (unless cut with a laser)
- Perma-TWILL® is also available in 51" rolls
Useful Resources:
View Pantone Colour Chart
Image slider
Benefits at a Glance
Material Specifications
Application Instructions
1-Colour Application Instructions| Time: | 20 Seconds |
| Temperature: | 350°F / 177°C |
| Pressure: | Firm |
| Peel: | Hot |
2-Colour Application Instructions| Background: | Apply for 10 seconds |
| Peel: | Warm |
| Foreground: | Apply for 30 seconds |
| Peel: | Hot |
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| GCC | Twill Blade | 150g | 0.225 | 25-50 cm/s |
| Graphtec | 45° | 13-16 | 0 | 30 cm/s |
| loline 300 | 45° | 300g | 0.94 | 50 cm/s |
| Roland GS-24 | Twill Blade | 140-160g | 0.5 | 30 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
PERMA-TWILL® TACKLE TWILL HEAT TRANSFER VINYL
Get a No-sew Appliqué Look
Material Overview
Our 100% polyester tackle twill heat transfer material is ideal for large jobs that require the look of appliqué without the sewing. Unless the material is cut with a laser, it will need to be sewn to prevent fraying.
Use Magic Mask® High Tack as a carrier to stabilize the material when cutting with a vinyl cutter.
Use Magic Mask® High Tack as a carrier to stabilize the material when cutting with a vinyl cutter.
- Features a permanent adhesive
- Must be sewn to prevent fraying (unless cut with a laser)
- Perma-TWILL® is also available in 51" rolls
Useful Resources:
View Pantone Colour Chart
Image slider
Material Specifications
Benefits at a Glance
Available Colours
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Application Instructions
1-Colour Application Instructions| Time: | 20 Seconds |
| Temperature: | 350°F / 177°C |
| Pressure: | Firm |
| Peel: | Hot |
2-Colour Application Instructions| Background: | Apply for 10 seconds |
| Peel: | Warm |
| Foreground: | Apply for 30 seconds |
| Peel: | Hot |
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| GCC | Twill Blade | 150g | 0.225 | 25-50 cm/s |
| Graphtec | 45° | 13-16 | 0 | 30 cm/s |
| loline 300 | 45° | 300g | 0.94 | 50 cm/s |
| Roland GS-24 | Twill Blade | 140-160g | 0.5 | 30 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.