.png)
Français (Canada)
SISER® EASYWEED®
Material Overview
Why choose between sparkle and dimension when you can have both? Easy® Puff Glitter HTV features ultra-fine glitter flakes that shimmer with iridescent colours. Once heat applied, Easy® Puff Glitter then expands, giving designs a 3D appearance!
- Embedded glitter flakes that won’t shed even after washing
- Iridescent, colour-shifting finish
- Dimensional effect that activates with a 2nd heat application
- Applies to cotton, polyester, and cotton/poly blends
- Available in 12” wide rolls
Image slider
Benefits at a Glance
Material Specifications
Application Instructions
1-Colour Application Instructions - 1st Press| Time: | 2 seconds |
| Temperature: | 310°F / 155°C |
| Pressure: | Medium |
| Peel: | Warm/Cold |
| Cover Sheet: | Kraft Paper
Remove after pressing |
Note: Hand ironing and layering are not recommended.
1-Colour Application Instructions - 2nd Press| Time: | 10 -15 seconds |
| Temperature: | 305°F / 150°C |
| Pressure: | Medium |
| Peel: | N/A |
Special Notes- Repeated applications will permanently flatten the raised puff special effect.
- Apply last when layering with other materials on the same garment.
- Not recommended for hand iron applications.
- Using heat transfer pillows not recommended with this material.
- Please apply a test design before going into full production.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with no more than 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is 2 years.
Care InstructionsFor best results, it is recommended to wait 24 hours before first wash. Machine wash cold. Tumble dry low. Do not dry clean or use liquid fabric softener or bleach. Wash inside out for best results.
NotesThe recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Romeo | 45° | 30-45 | .250 | 20cm/s |
| Graphtec | 45° | 150-200gf | .250 | 20cm/s |
| Silhouette Cameo 4/5 | AutoBlade,
5/4° | 30/25 | N/A | 8 |
| Cricut (Explore/ Maker) | AutoBlade | N/A | N/A | N/A |
- Always test cut prior to any production run.
- For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
- Settings may vary based on blade condition and age of machine.
SISER® EASY® PUFF GLITTER HEAT TRANSFER VINYL
2 Special Effects, 1 Stunning HTV
Material Overview
Why choose between sparkle and dimension when you can have both? Easy® Puff Glitter HTV features ultra-fine glitter flakes that shimmer with iridescent colours. Once heat applied, Easy® Puff Glitter then expands, giving designs a 3D appearance!
- Embedded glitter flakes that won’t shed even after washing
- Iridescent, colour-shifting finish
- Dimensional effect that activates with a 2nd heat application
- Applies to cotton, polyester, and cotton/poly blends
- Available in 12” wide rolls
Image slider
Material Specifications
Benefits at a Glance
Available Colours
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Application Instructions
1-Colour Application Instructions - 1st Press| Time: | 2 seconds |
| Temperature: | 310°F / 155°C |
| Pressure: | Medium |
| Peel: | Warm/Cold |
| Cover Sheet: | Kraft Paper Remove after pressing |
Note: Hand ironing and layering are not recommended.
1-Colour Application Instructions - 2nd Press| Time: | 10 -15 seconds |
| Temperature: | 305°F / 150°C |
| Pressure: | Medium |
| Peel: | N/A |
Special Notes- Repeated applications will permanently flatten the raised puff special effect.
- Apply last when layering with other materials on the same garment.
- Not recommended for hand iron applications.
- Using heat transfer pillows not recommended with this material.
- Please apply a test design before going into full production.
Care InstructionsFor best results, it is recommended to wait 24 hours before first wash. Machine wash cold. Tumble dry low. Do not dry clean or use liquid fabric softener or bleach. Wash inside out for best results.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with no more than 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is 2 years.
NotesThe recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Romeo | 45° | 35 - 45 | .250 | 20 cm/s |
| Roland GS-24 | 45° | 150 - 200 gf | .250 | 20 cm/s |
| Silhouette Cameo 4/5 | AutoBlade, 5/4 | 30 / 25 | N/A | 8 |
| Cricut (Explore/Maker) | AutoBlade | N/A | N/A | N/A |
- Always test cut prior to any production run.
- For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
- Settings may vary based on blade condition and age of machine.