.png)
Français (Canada)
CAD-CUT® PREMIUM PLUS™ HEAT TRANSFER VINYL
Material Overview
With superior stretch and rebound, Premium Plus™ was designed to keep up with the most strenuous movements while retaining its original shape. This low-temp material is the ideal choice when decorating heat-sensitive performance wear, and once heat applied has an extremely soft and lightweight feel.
Note: Premium Plus High Tack weeding works best when in conjunction with weeding panel or weeding table
- Thin, soft & durable
- Choose low tack for larger designs
- Choose high tack for detailed designs
Note: Premium Plus High Tack weeding works best when in conjunction with weeding panel or weeding table
Useful Resources:
View Pantone Colour Chart
Image slider
Benefits at a Glance
Material Specifications
Application Instructions
High Tack Application Instructions| Time: | 8-12 Seconds |
| Temperature: | 280-300°F / 138-149°C |
| Pressure: | Medium |
| Peel: | Hot |
| Two-Colour: | 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds |
Heated Lower Platen - 100% Polyester| Time: | 10 seconds |
| Upper Temp.: | 270°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Hot for High Tack |
Heated Lower Platen - 95% Polyester / 5% Spandex / Triblends| Time: | 30 Seconds |
| Upper Temp.: | 270°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
Hotronix® 360 IQ® Hat Press| Time: | 45 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Warm/Cold |
| Cover Sheet: | 1/8" Foam Pad |
Special NotesStahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Graphtec | 45° | 9-11 | 0 | 20 cm/s |
| Roland GS-24 | 45° | 90-110g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Educational Videos
How to Heat Press: CAD-CUT® Premium Plus™
Uploaded on Jul 27, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Premium Plus™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Uploaded on Jul 27, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Premium Plus™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Top 3 Reasons To Buy: CAD-CUT® Premium Plus™
Uploaded on Apr 16, 2021
Learn about one of the softest heat transfer vinyl on the market in CAD-CUT® Premium Plus™. This heat transfer material is great for performance wear due to its incredible stretch, low-temperature application, and lightweight feel. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business.
Uploaded on Apr 16, 2021
Learn about one of the softest heat transfer vinyl on the market in CAD-CUT® Premium Plus™. This heat transfer material is great for performance wear due to its incredible stretch, low-temperature application, and lightweight feel. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business.
CAD-CUT® PREMIUM PLUS™ HEAT TRANSFER VINYL
The Softest HTV Built for Performance
Material Overview
With superior stretch and rebound, Premium Plus™ was designed to keep up with the most strenuous movements while retaining its original shape. This low-temp material is the ideal choice when decorating heat-sensitive performance wear, and once heat applied has an extremely soft and lightweight feel.
Note: Premium Plus High Tack weeding works best when in conjunction with weeding panel or weeding table
- Thin, soft & durable
- Choose low tack for larger designs
- Choose high tack for detailed designs
Note: Premium Plus High Tack weeding works best when in conjunction with weeding panel or weeding table
Useful Resources:
View Pantone Colour Chart
Image slider
Material Specifications
Benefits at a Glance
High Tack Available Colours
Limited Edition Colours
Hover image
Hover image
Hover image
Standard Colours
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Hover image
Application Instructions
High Tack Application Instructions| Time: | 8-12 Seconds |
| Temperature: | 280-300°F / 138-149°C |
| Pressure: | Medium |
| Peel: | Hot |
| Two-Colour: | 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds |
Heated Lower Platen - 100% Polyester| Time: | 10 seconds |
| Upper Temp.: | 270°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Hot for High Tack |
Heated Lower Platen - 95% Polyester / 5% Spandex / Triblends| Time: | 30 Seconds |
| Upper Temp.: | 270°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
Hotronix® 360 IQ® Hat Press| Time: | 45 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Warm/Cold |
| Cover Sheet: | 1/8" Foam Pad |
Special NotesStahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Graphtec | 45° | 9-11 | 0 | 20 cm/s |
| Roland GS-24 | 45° | 90-110g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Educational Videos
How to Heat Press: CAD-CUT® Premium Plus™
Uploaded on Jul 27, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Premium Plus™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Uploaded on Jul 27, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Premium Plus™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Top 3 Reasons To Buy: CAD-CUT® Premium Plus™
Uploaded on Apr 16, 2021
Learn about one of the softest heat transfer vinyl on the market in CAD-CUT® Premium Plus™. This heat transfer material is great for performance wear due to its incredible stretch, low-temperature application, and lightweight feel. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business.
Uploaded on Apr 16, 2021
Learn about one of the softest heat transfer vinyl on the market in CAD-CUT® Premium Plus™. This heat transfer material is great for performance wear due to its incredible stretch, low-temperature application, and lightweight feel. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business.