.png)
Français (Canada)
Important Notice
This product is currently on back order and cannot be ordered until further notice.
This product is currently on back order and cannot be ordered until further notice.
CAD-COLOUR® DEFENSE II PRINTABLE VINYL
Material Overview
CAD-COLOUR® Defense II is an easy to use, printable, heat transfer media - specially formulated to inhibit dye migration! Achieve a great matte finish and color with this brand new printable heat transfer vinyl.
- Our best defense available for decorating fully sublimated jerseys
- Featuring a white base with a beautiful matte finish
- Quick drying
- Economical
- Recommended mask: Medium Tack Magic Mask®
- Easy to weed, print & cut
Benefits at a Glance
Material Specifications
Application Instructions
1-Colour Application Instructions| Time: | 15 Seconds |
| Temperature: | 265°F / 130°C |
| Pressure: | Medium |
| Peel: | Wait 5 seconds, Peel Warm |
Hotronix® 360 IQ® Hat Press| Time: | 45 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Warm/Cold |
| Cover Sheet: | 1/8" Foam Pad |
Print/Cut Instructions- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland VersaCAMM | 45° | 100g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
CAD-COLOUR® DEFENSE II PRINTABLE VINYL
Perfect Defense Against Dye-Migration
Material Overview
CAD-COLOUR® Defense II is an easy to use, printable, heat transfer media - specially formulated to inhibit dye migration! Achieve a great matte finish and color with this brand new printable heat transfer vinyl.
- Our best defense available for decorating fully sublimated jerseys
- Featuring a white base with a beautiful matte finish
- Quick drying
- Economical
- Recommended mask: Medium Tack Magic Mask®
- Easy to weed, print & cut
Material Specifications
Image slider
Benefits at a Glance
Application Instructions
1-Colour Application Instructions| Time: | 15 Seconds |
| Temperature: | 265°F / 130°C |
| Pressure: | Medium |
| Peel: | Wait 5 seconds, Peel Warm |
Hotronix® 360 IQ® Hat Press| Time: | 45 seconds |
| Upper Temp.: | 280°F |
| Lower Temp.: | 320°F |
| Pressure: | Medium |
| Peel: | Warm/Cold |
| Cover Sheet: | 1/8" Foam Pad |
Print/Cut Instructions- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland VersaCAMM | 45° | 100g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.