.png)
Français (Canada)
CAD-COLOUR® INSTA PRINT PRINTABLE VINYL
Material Overview
- Dries instantly, effectively cutting production time in half
- Thin, with soft hand and great stretch
- Easy to print, cut, and weed
- Semi-matte finish
- For light or dark-coloured fabrics
- Recommended mask: Medium Tack Magic Mask®
Benefits at a Glance
Material Specifications
Application Instructions
1-Colour Application Instructions| Time: | 15-20 Seconds |
| Temperature: | 300°F / 149°C |
| Pressure: | Medium |
| Peel: | Wait 5 seconds, peel Warm |
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland GX-24 | 45°/60° | 100-120g | 0.25 | 20 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
CAD-COLOUR® INSTA PRINT PRINTABLE VINYL
Fast & Efficient - Virtually No Dry Time!
Material Overview
- Dries instantly, effectively cutting production time in half
- Thin, with soft hand and great stretch
- Easy to print, cut, and weed
- Semi-matte finish
- For light or dark-coloured fabrics
- Recommended mask: Medium Tack Magic Mask®
Material Specifications
Benefits at a Glance
Application Instructions
1-Colour Application Instructions| Time: | 15-20 Seconds |
| Temperature: | 300°F / 149°C |
| Pressure: | Medium |
| Peel: | Wait 5 seconds, peel Warm |
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland GX-24 | 45° / 60° | 100-120g | 0.25 | 20cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.