.png)
Français (Canada)
CAD-COLOUR® GLITTERTEK™ PRINTABLE VINYL
Material Overview
Print full colour designs with a glitter finish using your solvent or eco-solvent print/cut system.
- Soft hand, excellent stretch and rebound
- Available in Silver or Gold (Gold available by phone order only)
- Because of its metallic background, GlitterTEK can result in colour shifting – it should not be used for designs where an exact colour match is required
- Recommended mask: Solutions® Mask
- Stahls' TEK™ printable materials (not including SuperTEK® Sublistop™)
- CAD-CUT® Super Film™
- CAD-CUT® Fashion-REFLECT™ (to avoid reducing reflectivity, Stahls' recommends using GlitterTEK only as a base layer with this product)
Image slider
Benefits at a Glance
Material Specifications
Application Instructions
1-Colour Application Instructions| Time: | 8-10 Seconds |
| Temperature: | 265-285°F / 129-141°C |
| Pressure: | Medium |
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland GS-24 | 45° | 70g | 0.225 | 30 cm/s |
| Roland SPi/VSi/VPi | 45° | 110-120g | 0.25 | 30 cm/s |
| Graphtec CE-6000 | 45°, .9mm | 18-20g | 0.15 | 30 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
CAD-COLOUR® GLITTERTEK™ PRINTABLE VINYL
Stretch Your Creativity
Material Overview
Print full colour designs with a glitter finish using your solvent or eco-solvent print/cut system.
- Soft hand, excellent stretch and rebound
- Available in Silver or Gold (Gold available by phone order only)
- Because of its metallic background, GlitterTEK can result in colour shifting – it should not be used for designs where an exact colour match is required
- Recommended mask: Solutions Mask®
- Stahls' TEK™ printable materials (not including SuperTEK® Sublistop™)
- CAD-CUT® Super Film™
- CAD-CUT® Fashion-REFLECT™ (to avoid reducing reflectivity, Stahls' recommends using GlitterTEK only as a base layer with this product)
Image slider
Material Specifications
Image slider
Benefits at a Glance
Application Instructions
1-Colour Application Instructions| Time: | 8-10 Seconds |
| Temperature: | 265-285°F / 129-141°C |
| Pressure: | Medium |
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland® GS-24 | 45° | 70g | 0.225 | 30 cm/s |
| Roland® SPi/VSi/VPi | 45° | 110-120g | 0.25 | 30 cm/s |
| Graphtec CE-6000 | 45°, .9mm | 18-20g | 0.15 | 30 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.