.png)
Français (Canada)
CAD-COLOUR® SOFT FOAM PRINTABLE VINYL
Material Overview
Use your print/cut system to create unique designs that add a raised effect to any item you’re decorating. With its smooth, velvet-like texture, Soft Foam is perfect for creating premium looks for everyday fashion, spirit wear, athletics, and more. Due to the porous texture of the material, printed designs will have a matte finish with soft, muted colours.
- Specialty printable HTV with a slightly raised look
- Not recommended for finely detailed designs
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printer
- Recommended mask: Medium Tack Magic Mask®
- Soft Foam is available as full colour pre-printed patterned rolls in CAD-CUT® Patterns
Image slider
Benefits at a Glance
Material Specifications
Application Instructions
1-Colour Application Instructions| Time: | 15 Seconds |
| Temperature: | 302°F / 150°C |
| Pressure: | 3 to 4 |
| Peel: | Hot |
Print/Cut Instructions- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in room temperature around 68 degrees Fahrenheit with low humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Graphtec CE6000-60 | 45° | 14 | 0 | 25 cm/s |
| Roland GS-24 | 60° | 160 | 0 | 25 cm/s |
| Craft Cutter | Setting | Blade | Force | Speed |
|---|---|---|---|---|
| Cricut | Light Cardstock+ | Fine-point | 287 | N/A |
| Silhouette | Heat Transfer Flocked | 9 | 33 | 5 |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
CAD-COLOUR® SOFT FOAM PRINTABLE VINYL
Create Full Colour Dimensional Designs With This Printable HTV
Material Overview
Use your print/cut system to create unique designs that add a raised effect to any item you’re decorating. With its smooth, velvet-like texture, Soft Foam is perfect for creating premium looks for everyday fashion, spirit wear, athletics, and more. Due to the porous texture of the material, printed designs will have a matte finish with soft, muted colours.
- Specialty printable HTV with a slightly raised look
- Not recommended for finely detailed designs
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printer
- Recommended mask: Medium Tack Magic Mask®
- Soft Foam is available as full colour pre-printed patterned rolls in CAD-CUT® Patterns
Image slider
Material Specifications
Benefits at a Glance
Application Instructions
1-Colour Application Instructions| Time: | 15 Seconds |
| Temperature: | 302°F / 150°C |
| Pressure: | 3 to 4 |
| Peel: | Hot |
Print/Cut Instructions- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in room temperature around 68 degrees Fahrenheit with low humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Graphtec CE6000-60 | 45° | 14 | 0 | 25 cm/s |
| Roland GS-24 | 60° | 160 | 0 | 25 cm/s |
| Craft Cutter | Setting | Blade | Force | Speed |
|---|---|---|---|---|
| Cricut | Light Cardstock + | Fine-point Blade | 287 | N/A |
| Silhouette | Heat Transfer Flocked | 9 | 33 | 5 |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.