.png)
Français (Canada)
CAD-COLOUR® SUPERTEK® GLOSS CLEAR PRINTABLE VINYL
Material Overview
With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
- Lightweight, stretchable, incredibly soft hand
- Low application temperature - safe for sensitive materials
- Apply on another material for tone-on-tone "liquid glass" look
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
- For white or light fabrics only
- Compatible with our Stahls' Rip-Away Appliqué™ Process
Image slider
Benefits at a Glance
Material Specifications
Application Instructions
1 Colour Application Instructions| Time: | Tack for 5 seconds, peel warm, cover and seal 5 seconds |
| Temperature: | 280-300°F / 138-150°C |
| Pressure: | Medium |
Heated Lower Platen Application| Upper: | 250°F |
| Lower: | 320°F |
| Time: | 12-15 seconds (depending on thickness of garment) |
| Pressure: | Medium |
Print/Cut Instructions- Print and cut your design in mirrored form on the adhesive side of the roll
- Once dry, weed away excess material
- Position the masked design on the garment for heat application
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland GX-24 | 45° | 70-90g | 0.25 | 30 cm/s |
| Roland VP-300 | 45° | 70-90g | 0.25 | 30 cm/s |
| Roland SP-300 | 45° | 70-90g | 0.25 | 30 cm/s |
| Roland XC-540 | 45° | 70-90g | 0.25 | 30 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Educational Videos
How to Heat Press: CAD-COLOR® SuperTEK® Gloss Clear
Uploaded on Aug 18, 2021
Learn the step-by-step instructions of how to properly heat press CAD-COLOR® SuperTEK® Gloss Clear to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure.
Uploaded on Aug 18, 2021
Learn the step-by-step instructions of how to properly heat press CAD-COLOR® SuperTEK® Gloss Clear to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure.
Top 3 Reasons to Buy: CAD-COLOR® SuperTEK® Clear Gloss
Uploaded on Jul 16, 2021
Uploaded on Jul 16, 2021
CAD-COLOUR® SUPERTEK® GLOSS CLEAR PRINTABLE VINYL
Create a High-Gloss Finish
Material Overview
With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
- Lightweight, stretchable, incredibly soft hand
- Low application temperature - safe for sensitive materials
- Apply on another material for tone-on-tone "liquid glass" look
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
- For white or light fabrics only
- Compatible with our Stahls' Rip-Away Appliqué™ Process
Image slider
Material Specifications
Benefits at a Glance
Application Instructions
1 Colour Application Instructions| Time: | Tack for 5 seconds, peel warm, cover and seal 5 seconds |
| Temperature: | 280-300°F / 138-150°C |
| Pressure: | Medium |
Heated Lower Platen Application| Upper: | 250°F |
| Lower: | 320°F |
| Time: | 12-15 seconds (depending on thickness of garment) |
| Pressure: | Medium |
Print/Cut Instructions- Print and cut your design in mirrored form on the adhesive side of the roll
- Once dry, weed away excess material
- Position the masked design on the garment for heat application
Care InstructionsMachine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
StorageStore in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Instructions| Cutter | Blade | Force | Offset | Speed |
|---|---|---|---|---|
| Roland GX-24 | 45° | 70-90g | 0.25 | 30 cm/s |
| Roland VP-300 | 45° | 70-90g | 0.25 | 30 cm/s |
| Roland SP-300 | 45° | 70-90g | 0.25 | 30 cm/s |
| Roland XC-540 | 45° | 70-90g | 0.25 | 30 cm/s |
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Educational Videos
How to Heat Press: CAD-COLOR® SuperTEK® Gloss Clear
Uploaded on Aug 18, 2021
Learn the step-by-step instructions of how to properly heat press CAD-COLOR® SuperTEK® Gloss Clear to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure.
Uploaded on Aug 18, 2021
Learn the step-by-step instructions of how to properly heat press CAD-COLOR® SuperTEK® Gloss Clear to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure.
Top 3 Reasons to Buy: CAD-COLOR® SuperTEK® Clear Gloss
Uploaded on Jul 16, 2021
Uploaded on Jul 16, 2021