CAD-CUT® FLOCK Heat Transfer Vinyl
Low-cost decorating alternative to embroidery.
Flock is being discontinued. Limited quantities available up to 25% off. Discount pricing shown. All sales are final and cannot be returned.
Material Specifications
- Composition: Polyvinyl Chloride (PVC)
- Carrier: Pressure-Sensitive
- Thickness: 484 microns/.484mm
- Stretch & Rebound: 2
- Washability: 50
- Safety:
roll over image to zoom
Order Now
User Guide
Overview
1-Colour Application Instructions
Time:
15-20 seconds
Temperature:
320°F/160°C
Pressure:
Medium
Peel:
Cold
2-Colour Application Instructions
Time:
Tack background 2 seconds, peel cool, place foreground on top, 12 seconds
Temperature:
320°F/160°C
Pressure:
Medium
Peel:
Cool
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material Combination Instructions
Select foreground material:
Select background material:
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| GCC | Flock Blade | 170-220g | 0.5 | 15 - 35 cm/s |
| Graphtec | 45° | 28 | 1 | 30 |
| Roland GX-24 | Flock Blade | 170-220g | .50 | 15 - 35 cm/s |
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favourites
You already have 10 favourites.
Remove one to add this one.
Adding Favourite...
