https://www.stahls.ca/stahls/content/images/products/Premium-Plus-High-Tack-Vinyl-Butterfly_small.jpg

NEW CAD-CUT® Premium Plus™ Heat Transfer Vinyl

Now with more colours and high and low-tack options.

  • Applies at a low temp to prevent scorching on heat-sensitive items
  • Soft & Stretchable
  • Silky matte finish
  • Choose low tack for larger designs, high tack for more detailed designs
  • High tack peels hot for quick production and no distortion of design on stretchy fabrics
  • New range of bright colours
  • Available in Pre-Cut Letters and Numbers
  • Order online and save 15%, discount is applied automatically
Remaining original colours of Premium Plus are available while supplies last on the Premium Plus clearance page
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Thickness:
    Low Tack: 80-108 microns/.080-108mm
    High Tack: 92 microns/.092mm
  • Stretch & Rebound: 5
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

Low Tack Application Instructions

Time: 8-12 Seconds
Temperature: 280-300°F/138-149°C
Pressure: Medium
Peel: Warm or Cold
Two-Colour Tack background 2 seconds, peel warm, place foreground on top, 8 seconds
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

High Tack Application Instructions

Time: 8-12 Seconds
Temp: 280-300°F/138-149°C
Pressure: Medium
Peel: Hot
Two-Colour 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

Material/Fabric Compatibility

  • 100% Cotton
  • 100% Preshrunk Cotton
  • 100% Polyester
  • Cotton/Poly Blends
  • Lycra/Spandex Blends

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Print Application Instructions

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Graphtec (Low Tack) 45° 11135
Graphtec (High Tack) 45° 10.3 mm64 cm/s
Roland GS-24 45° 60-70g.2525 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Review

Average Customer Rating

3.27
(based on 95 reviews)
 HORRIBLE!!
Reviewed by Trisha Birch 11/13/2018 1:39:39 PM

I bought this product as an alternative to SportFilm Lite because it was out of stock. My designs have a lot of detail so I ordered the tacky version. It is terrible!! The worst vinyl I've ever used. Going to throw away the rest of the 5 yards as it's not worth my aggravation! I'll purchase from another source if SportFilm Lite isn't back in stock. Buyer BEWARE! (Wish I had listened to the reviews!)


 worse vinyl ever
Reviewed by hai nguyen 11/12/2018 9:57:33 AM

I tried this vinyl because I wanted to save some money, but a few dollars isn't worth all the trouble. I rather pay a little more and have happy customers then lose a customer forever. if I saw a product on amazon that had 3/5 star reviews I would definitely not buy that product. same goes for this product.


 PERFECT
Reviewed by Keno 10/18/2018 9:42:10 AM

Love the premium plus! Haven't had any issues with this product. Weeds and cuts perfect. Whenever I use vinyl, I ALWAYS do a double cut to ensure it weeds better. I have had issues in the past with other products but sometimes you have to find your own way of doing things. I always double cut, and always heat press it for a few extra seconds after the garment has cooled.


 Don't Buy!!
Reviewed by Dana Lake 9/30/2018 10:47:22 PM

This product is SO hard to weed! It doesn't cut right. Almost every color has been bad.


 Perfect for Polyester
Reviewed by Suzanne 9/20/2018 11:49:33 PM

This is hands down the best material for polyester - it stretches, and it's light; it's great for jerseys and warmups! It's my new favorite vinyl!


 A Little Tough
Reviewed by Dashiel 9/14/2018 7:12:58 AM

I had the same issue as a few people with the Cameo. The regular settings don't work at all. Then I used the settings for Glitter and the cut lines were consistent. I will also say that as the video says it's not the best for fine detail. Smaller letters didn't come out well.


 Works but you need to experiment...
Reviewed by Jeff 9/6/2018 11:03:59 AM

Cons: First time using premium plus compared to other products i've used....right off the bat had issues...cutting the thin/rubbery like material was inconsistent. I ended up switching to a brand new blade to fix the issue, still had to play around with the right pressure. So be prepared to test cut and press on scrap fabric. Next up...I ordered Dk green, white and black...the Black was an effort in frustration to weed off the backing, stuck like crazy to the backing...uggh. Dk green and white I had no problem...cut and weeded like butter compared to the Blk. Onto pressing....again needed to experiment to find the right temp/pressure and time. I ended up pressing at 325 F for 15 seconds, peel cold and repress after just because i didn't feel confident in the product...maybe wasn't necessary to repress, but didn't want any issues. Washing and longevity....did a few dozen...so hoping I dont hear back about lifting.... Pros: The look and feel of the product is great...


 LOVE this product!
Reviewed by ROBIN RODEN 9/1/2018 8:19:07 AM

Thank you Amy for telling me about this vinyl! I LOVE it and so do my customers!


 LOVE!!
Reviewed by Lisa 8/8/2018 5:41:39 PM

I use this for a dance studio. It's very lightweight on thin fabrics, stretches great and it is holding up great even through daily dance practices. I prefer weeding this over normal htv anyday. I use a sil cameo and don't have cutting, weeding, or pressing issues. Dance instructor happy, kids happy.


 Love this vinyl
Reviewed by Joanne 6/24/2018 3:20:14 PM

Love the soft feel of this vinyl. I have no issues cutting this at all. Just finished 140 t shirts using my Cameo 3. Weeds like butta, no issues with it not adhering to the garment.


 Cutting not consistent
Reviewed by Jessica 6/20/2018 8:18:32 PM

I agree with Laura I ordered several rolls of the CAD Cut Premium Plus Vinyl in different colors and it does not cut well at all. I tried the Iron On, Cardstock, and Light Card Stock setting and it does not cut. I wasted 122.00 :(


 Weeding this vinyl sucks
Reviewed by Laura 6/11/2018 2:18:57 PM

I bought a massive roll of black vinyl and I have tried many, many different settings on my Silhouette Cameo, including the settings referred by Stahls themselves. I ALWAYS have to re-cut vinyl because once I start weeding, there are always parts that are not cut. I find there is no consistency to this vinyl-- some days it will cut fine, other times, I have to completely re-cut. I will finish my roll but will not be ordering this again.


 My main vinyl
Reviewed by Jonathan 5/7/2018 11:42:12 PM

Used it for 3+ years. Works well on cotton and cotton/polyester. May peel on pure polyester if you want to avoid scorch marks. Best to heat press with enough heat, pressure and time. Small designs it won't work as well as fashion lite, but regular jobs it can be weeded just fine.


 Not what I thought
Reviewed by Traytopia 4/26/2018 12:19:18 AM

I like the feel of the vinyl, but not the fact that it doesn't stick very well. I tried it for the first time, I may give it another try after I do a little more research, my hope is that there is a trick to the peel and stick. I want to like it, so far not so much


 I wanted to love it...
Reviewed by Megan 3/25/2018 11:46:14 PM

After seeing so many mixed reviews, I decided to give this material a try. I am so so so so disappointed. It has ruined so many shirts because of it's inability to stick to the garment. I tried it on cotton and a few blends and I struggled. Weeding was not a problem for me, neither was cutting. I love the soft feel of it, but only when it works. (25% of the time) I will most likely not buy this product again.


 Top Quality
Reviewed by Jane Mitchinson 1/17/2018 4:33:06 PM

I have been pressing vinyl t's for a few years now and have tried several different brands of vinyl. Premium Plus is by far the best. It is easy to weed, presses perfectly, and never comes off. I would encourage anyone new to vinyl cutting, to read the instructions thoroughly and watch the tutorial videos that Stahls' puts online.


 My Favorite. Premium Plus Rocks
Reviewed by Loni 1/15/2018 12:51:53 PM

Premium Plus is by far one of the best products out there. It melts into the fabric and does not peel at all. I've washed several shirts and premium plus stays put. All of my customers love it.


 Too Rubbery and Peels Off
Reviewed by Brian Ellsworth 1/5/2018 9:03:08 PM

Not sure if it's because there's no Roland profile specifically for this material or not, but I feel as if it doesn't complete the cut because it's too rubbery and, therefore, extremely difficult to weed. I have to recut and try again and again before I get anything decent.


 TOO RUBBERY
Reviewed by JIM BOCEK 12/20/2017 1:00:52 PM

DIFFICULT TO WEED AND IT PEELS OFF WHEN TAKING PLASTIC OFF


 GREAT PRODUCT
Reviewed by TIM FERRELL 12/17/2017 1:19:41 PM

I can not believe the review to the left, I use only Premium Plus now ever since it came out. Easy to weed, stays like new on items year after year, I have had customers come to me because of the great quality. If you can not see the lines, like the review to the left, replace your blade and change pressure One of the best products in the tee shirt industry


 Favorite htv
Reviewed by Rachael 11/23/2017 9:44:41 AM

After trying a variety of products, this is my absolute favorite htv. It is so silky smooth, it's like butter..and you can't find this stretch anywhere else. It can be a challenge to find the perfect cut settings, but once you do it weeds pretty well. it has a lot of stretch so if you want stretch then it's not going to weed quite as easily since it has give. it's well worth it for those with alot of curves


 I Hate Premium Plus
Reviewed by Trina Frederickson 11/3/2017 2:50:10 PM

I've got a number of cutters and found this product really difficult to cut. I'm also having a hard time getting it to stick on my item. I've increased heat and pressure. Cold peel seems to work part of the time. I'll be glad when I've used up what I've got and can order my regular product.


 My Go To
Reviewed by Shar Wilson 9/26/2017 8:28:51 PM

I love the soft feel of this material and it works with my designs. The colours are vibrant and I would recommend this product to anyone. I switched to this products after using many, many vinyls.


 Best go to HTV out there
Reviewed by Jenna Baynes 9/17/2017 3:06:18 AM

I love premium plus. It's almost all I use. I hate when you don't have the color I need! I have washed everything on regular wash not inside out and regular dryer cycle and nothing has lifted after many, many washes so I feel comfortable using this product for customers... It's carrier sheet is not as tacky as some others so your little weeded bits don't get stuck everywhere. I literally use this vinyl on everything and have not yet had it not adhere with ease :)


 Good Product But Hard to See Cut Lines
Reviewed by Klim Chuplygin 9/16/2017 11:14:11 AM

I'll start off with the good. The material is very thin and extremely light hand, cuts and weeds easily enough but I've found one major flaw that will prevent me from using this: it's the fact that on most colors I've used it's very hard to see the cut lines after the plotter is done cutting and it's time to weed. I have perfect eyesight and it was a pain weeding smaller designs on white color because I couldn't see the outlines of the graphics I was weeding. Going back to Siser easyweed stretch.


 Great product!
Reviewed by Susan Highfill 9/4/2017 3:58:43 PM

I needed this to try and press for Rayon shirts. Of course the shirts still scorched some but that was not because of the product. It pressed great at 280 and was about as minimal a scorch i could get on that type of product. I use a silhouette cameo and was able to cut perfectly using the standard glossy vinyl setting. i do use a CB09 blade and not a silhouette blade though. Hope this is helpful to anyone. Overall LOVE the product!


 Silhouette Cameo3 + Premium Plus?
Reviewed by Nannette 7/31/2017 3:18:47 PM

Hello, Soft feel on fabric. Like it a lot. HELP! I am looking for cutting settings for this vinyl when using the Silhouette Cameo 3. I am new to heat press and vinyl after many years of embroidery. I got lucky on a detailed job but then I have made a few mistakes. I am pretty sure it is the cut setting. Once the peel off film was also cut and the next try nothing cut at all...


 Cost Effective
Reviewed by Jonathan 6/4/2017 2:23:28 PM

Useful on both polyester and cotton, you'll need to play around with pressing pressure/temp, and do a double press. Not for small details, it's economical on regular size single colour prints.


 Pretty much our go-to vinyl
Reviewed by JMarquez 5/5/2017 5:45:31 PM

Just recently (2 months) started using vinyl on different types of shirts (mixes with polyviscose, rayon,spandex) and after trying out different brands and other cadcut vinyls, this is pretty much what we use for most. Good stretch and nice to be able to press at low temps to prevent scorching. Ease of weeding is pretty good in comparison to the Fashion Film and others but not as easy as something like quickflex. Haven't had any problems with adhesion; for those with issues I would say check your process, especially pressure settings.


 great on nylon flags
Reviewed by Jerry 4/19/2017 3:12:00 PM

I tested the adhesion and it worked well on nylon, Had a customer wanting custom one color flag/banner type use. 3ftx8ft, they placed the order and I told them this was a test and I stood behind my products. I did a $500 order for them, they supplied the flag/banners, they held up better than what they ever had in years past and have come back for a reorder to add to their collection which fly every day, This order is twice the size as last years.


 not recomended
Reviewed by Goran 4/3/2017 1:00:40 PM

I did purchase 5 rolls of this material and after shorts time I was really disappointed. It was really difficult to set my Graphtec FC 8000 to cut this material. Weeding is almost impossible and when applied will not stay on shirt for long. After wasted full roll if this material and several hours and several shirts I did giveup. Biggest disappointment did come from Stahls support they never responded to my calls and emails. Even I did send to some of their technicians pictures and nothing was done. I see there is many people that are not happy with this product. Conclusion is that this product is not consistent in quality and that is reason i DO NOT RECOMMEND TO USE IT.


 Still Trying
Reviewed by LaRue Marlow 3/26/2017 2:39:41 PM

I have polyester bowling jerseys that I'm working on putting names on the back. I have the cameo 3 and I just finally got the correct setting. So far good to go, now I can stop waisting money at the mall to put names on the back of the jerseys. I have the premium white material if anyone has any tips, leave a message for me.


 Best HTV ever
Reviewed by Teresa Stamper 3/16/2017 12:32:59 PM

I absolutely love this product. I have no trouble cutting or weeding it with my simple Silhouette Cameo cutting machine. Presses like a dream and so soft, feels like you printed it on. The white needs a little more time to cool before you peel it, but once you know what to do, no issues. Love Love Love


 Under rated
Reviewed by Travis 12/7/2016 3:51:40 PM

I had my doubts when reading reviews on this product but went ahead and ordered some to test it out on my own company shirts before using it in the future for customers. The product is the best feeling material I have ever used in retaining to heat transfer and has a super light feel. Cuts and weeds great, have done really fine detail with this product. I use and Roland versacamm sp540i and upped my cutting force to 80 instead of the 60-70 range and it works great. Make sure you're using a new blade to cut though. Have not found any cons yet


 DO NOT BUY THE WHITE ONE
Reviewed by John Pineda 10/20/2016 11:16:50 PM

Literally, wasted the entire roll! For some reason the white one is the worst material. It's different from the other colors. Wasted the entire material go see it for yourself if you want.


 Silver prevents 5 stars
Reviewed by Morris Kaneshige 9/16/2016 7:04:26 PM

This has been a great product to use and my only complaint is that the metallic silver for some reason seems like a different type of film over the other colors in the Premium Plus line. I use a Graphtec plotter and no issues with the weeding (other than the silver) and I have used this product without any issues on wick wear, all types of cotton, 50/50 blend and 100% polyester shirts.


 Cuts and weeds Great, so soft.
Reviewed by Lisa Marbutt 9/12/2016 11:02:27 PM

I used my new htv this weekend and am in love with it. It definitely sets itself apart from all the other HTV's out there. Already ordered more!


 Cuts and weeds great, has some washing issues.
Reviewed by Lee 8/26/2016 11:18:41 AM

I wish I could post pictures of things I have cut with this as reading some of these reviews does not do it justice. If you can set your cutter properly, use sharp blades and the main thing always, have good artwork, this stuff cuts fine detail beautifully. I just recently did some shirts for a friend that had a guitar on it and was able to get all the detail of the fret board with some of the pieces being less than 1/32 of an inch. The problem is not with the vinyl in that regards. It does have a tendency to stretch while your weeding it, but that is the entire reason to use Premium Plus is the rebound so you have to let it slide. Try Fashion Film if you don't need the rebound. My only gripe with the material is it doesn't hold as well as I would like to 100% Polyester. If the Polyester stretches, a lot of times the material can't stretch that far and it end up starting to peel. I have had no issues on 50/50 and 100% cotton however.


 Worst product ever!
Reviewed by Nicole 8/24/2016 1:10:59 AM

I haven't had a problem with any of the other CAD-CUT materials, but this Premium Plus is a joke! It's a mess to cut and a nightmare to try and weed. I followed all the directions to the T. Don't even bother if you have detail in your design. It's seriously like trying to weed rubber. I will never buy this waste of money again!


 Good for some fabric but not others
Reviewed by Shannon Dyck 8/8/2016 2:27:38 PM

Not my favorite product to cut/weed. Some colors cut better than others which is super frustrating. Best is is on 100% polyester moisture wicking fabrics ONLY. On regular cotton, or cotton blend products its terrible !. After a few washes (cold with no dryer) it starts to buckle/wrinkle & lift. Did an awesome hoodie for my daughter (thank goodness it was her hoodie), and it started to lift after a couple of washes. I washed in it cold water, no fabric softener and hang to dry. Very disappointed as the material/fabric combo chart says its good to use on cotton and cotton blends.


 Absolutely AWFUL to cut
Reviewed by Angela troupe 7/26/2016 2:11:08 PM

This by far and away has been the most awful material to work with. We have used different cutters, different blades, different pressures - basically every option that you can think of to make it cut. I will NEVER buy this material again. It won't cut even simple word designs. So FRUSTRATING!


 I love Premium Plus!!
Reviewed by Katie 7/13/2016 6:03:01 PM

The first time I used it (on a very detailed design) I found it a bit tricky to weed because of the stretch, but that is the very reason I keep coming back to it! I love how well it stretches with my lightweight knit garments! It also has a nice matte look which sets it apart from other types of HTV. Premium Plus is my go to HTV for basic colors! Cuts, weeds and presses without complaint every time.


 What kind of blade I need for this thing?
Reviewed by John Pineda 6/14/2016 9:30:22 PM

I have 4 different kinds of blades and did so many adjustments but I am still having trouble cutting, any special blade I need to cut this? I already wasted so much materials.


 AWESOME
Reviewed by Dustin Evans 5/17/2016 4:11:54 PM

I have done some detail cutting with the Premium Plus, this product is ABSOLUTELY amazing, I did have one failed attempt and found out that it's best to peel when cold. This also works very well with polo shirts as well as other very thin materials.


 It's called Premium for a reason
Reviewed by PJ Piatt 4/29/2016 8:28:23 AM

Our go to HTV for almost all applications. Love the soft feel and stretch.


 I take it back!
Reviewed by Ms. Mimi 4/20/2016 12:47:51 AM

Peeling after more than 3 washes. Low heat dryer dry, mild soap. I do not recommend Premium Plus... like ever.


 White premium plus
Reviewed by Ms. Mimi 4/16/2016 11:32:46 AM

I'm using Premium plus again because I have no choice! So far I have cut, weeded, heat pressed, and peeled with no problem. Love the feel on the shirt. Very soft. In the washer now, then dryer for testing. Updates soon.


 Love it but,
Reviewed by Val Miller 4/1/2016 2:48:00 PM

Great film, looks great but, the navy is not a true navy. wish you would offer a darker one. It is a base color plus a Vegas Gold would be nice as well.


 Very Happy with Premium Plus
Reviewed by Jessica Lundt 11/23/2015 3:00:59 PM

This is our go to heat transfer vinyl. I keep rolls in stock for the common colors and then buy sheets for the colors I don't use. I have only had issues with the metallic silver not cutting very well but the rest of the colors work perfectly. I was a little nervous to try it at first because the carrier sheet isn't very sticky but I prefer this over the super sticky types that attract everything. I love this product and would recommend it to everyone looking for a good all around material that comes in a wide variety of colors.


 Not the best on 100% cotton
Reviewed by Ms. Mimi 11/22/2015 1:06:51 AM

I have printed on Gildan, Cotton shirts, using neon pink, white, maroon, and carribean blue. I had no trouble cutting and weeding. The trouble started after heat pressing and peeling. At first I was peeling when it was still warm. The artwork did not stick in most areas. So I had to re-press several times and even up my heat by +5 degrees. I waited until the heat pressed design was cold and then peeled. It was much better, but definitely not a quick peel. You still had to be very careful when peeling. I had to re-press with carrier sheet off, using kraft paper. My other problem is once it did stick to the shirt, after washing and drying on low heat, parts of the design peeled off. I have printed with fashion film and with thermo film, thermo grip, and did not have this problem. Never using Premium Plus on cotton again.


 Not the best on 100% cotton
Reviewed by Ms. Mimi 11/22/2015 1:06:43 AM

I have printed on Gildan, Cotton shirts, using neon pink, white, maroon, and carribean blue. I had no trouble cutting and weeding. The trouble started after heat pressing and peeling. At first I was peeling when it was still warm. The artwork did not stick in most areas. So I had to re-press several times and even up my heat by +5 degrees. I waited until the heat pressed design was cold and then peeled. It was much better, but definitely not a quick peel. You still had to be very careful when peeling. I had to re-press with carrier sheet off, using kraft paper. My other problem is once it did stick to the shirt, after washing and drying on low heat, parts of the design peeled off. I have printed with fashion film and with thermo film, thermo grip, and did not have this problem. Never using Premium Plus on cotton again.


 Love it
Reviewed by Rob Wilcox 11/9/2015 1:40:03 PM

if you use a good blade it cuts and weeds awesome, i use this product all the time its great, not all the colors will warm peel though


 Amateurs
Reviewed by Royce 8/27/2015 3:54:31 AM

Seems like the negative reviews are by amateurs who don't know what they're doing. This product is great and I use it for my brand and for doing custom products. Saying it doesn't cut or weed well? Haha.. Sounds like a personal problem and you don't know how to change the pressure on your cutter. Get the product and see for yourself! My only thing is I wish they would continuously grow their color selection.


 Black is terrible to weed
Reviewed by Jacob 7/12/2015 12:44:46 PM

I purchased several colors and for the most part, no issues, but the black should not be sold, it is a terrible product.


 Doesn't stick!
Reviewed by Trevor 5/18/2015 10:17:16 AM

Does not stick to shirts. Takes for forever to peel. Cuts and weeds nice but it's not good since it barely sticks to the shirts. Works a little better on 100% polyester but I will never get this stuff again!!


 Great product
Reviewed by Melissa Tovar 5/7/2015 10:20:05 PM

I was skeptical to buy this because of some of the reviews but I tried it and I am in love! It cut and weeded without any problem. It is very soft on the t-shirt and stretches which is what I needed for my fitted shirts. By far my favorite.


 Can't complain, if you don't use it right.
Reviewed by Robert Gonzales 4/14/2015 6:40:01 PM

I love working with this material, had no problems weeding or pressing. I used Gildan cotton shirts with the colors the customer requested. Most of all the softhand is what sold the customer.


 Awful... wasted two yards
Reviewed by Dee Grant 12/12/2014 3:06:21 PM

can't weed nor does it cut .... DON'T BUY


 Will never buy again!! This has ruined many of our shirts!
Reviewed by Lara Westbrook 7/30/2014 2:32:07 AM

I bought this product for the first time in white bc the fashion film was out of stock. I'm so sorry I did. I have tried a lot of different settings and it will never stick to the shirt properly and most of the time ends up ruining the shirts! I have never had any problems with the fashion film or any other htv but this one! Now I'm stuck with 5 yards of it!


 Most of the time great
Reviewed by Debra Wishard 6/25/2014 1:45:26 PM

I have used the white Premium Plus for a while now. It is hard to weed. But sometimes even on the same sheet I have to tug really hard and then the next cut over weeds better. I have used the white on darker colors before and it had been ok. Since I had not problems with the bleeding before I thought it would be ok to use on red aprons. The white has a pink under tone now… I am hoping client is ok with it since it took me forever to weed this out.


 Horrible to cut, Great to weed
Reviewed by Stephany 6/20/2014 7:08:57 PM

I suppose since I have an older cutter (Ioline 100) that is why I have so much trouble cutting this material? Everytime I use it there are multiple tries needed to get it right, and a waste of material. I've finally discovered I need to leave a 2" border to (hopefully) not have it wrinkle and jam up. It's constantly getting caught in the blade even then. And only coming in 20" rolls? More waste of material. Once it does finally cut properly it really is a dream to weed (even small letters) and it lays flat and thin on garment. That's the only plus. Trying to get it to adhere and stay put on garment is difficult. I will only use this material if I absolutely have to, and will more than likely not order again. Or have to raise my prices significantly.


 awesome!
Reviewed by donna 4/27/2014 10:00:00 AM

By far my favorite vinyl to use in my business! Perfect amount of stickiness to backing. Great to weed! Very soft nice feel on garment and the streatch makes it awesome on tshirts! Love Love Love!


 I LOVE THIS--Gives my business a new twist!!
Reviewed by Anna Knopka 4/15/2014 12:39:53 AM

I absolutely love this product. It is very easy to work with. Allows different mascots, sayings and art on various apparel. It gives my business a whole new service to offer.


 Great Material----Read on!
Reviewed by Steve 2/20/2014 11:17:45 AM

After reviewing the reviews, I figured I had 50-50 chance of it working.......well it does! It took me just a couple of minutes to find the proper setting and it cuts and weeds great. It is a little thinner than some of the other material, but it looks great on the shirts. I am new to the business and I figured it out quickly....buy it and I am positive that you won't be disappointed!!!!!!!!!


 Not on darks!
Reviewed by Tazz 2/10/2014 7:08:34 AM

Maize on Navy 84% Poly & 16% spandex..dye migration is terrible. White underbase layer was not an option, as the white is not a school color.


 LOVE IT!!
Reviewed by Jeremy 1/8/2014 5:05:52 PM

I have been buying alot of this premium plus lately. I can honestly say i love it! It literally heats to almost anything from shirts to sweats,spandex, 50/50 blends all of it. I even tryed it on fleece material which i wouldnt recommend but if you hit it a couple times on the press it finally holds. But they dont recommend fleece material in their chart for things it can go on anyways that was just out of my curiousity. YOU DONT NEED THE SPECIAL BLADE EITHER! I use just a mh871 - mk2 us cutter with a 45 degree blade. It does take about 15 minutes of test cutting to figure out the DF and Speed and then after that works like a dream! Easy to weed and apply. I use just an xacto knife and it works great i have weeders too but prefer my xacto knives. If this helps, All the colors are all cut at the same speed and down force, Except White Silver and Gold and the Neons just increase the downforce a hair up and everything should be smooth for ya. I love the feel and lightness on apparel.


 CAREFUL with the black
Reviewed by Stacy 12/11/2013 12:36:56 AM

I just opened my own t-shirt printing company, and I've been sold on this product until now. I ordered a TON of the black vinyl for a VERY important job and one roll cut GREAT, no problems, awesome with detail, very sticky backing. Then my 10 yard roll literally just falls off the backing when trying to weed. It's a nightmare!! I must say I've had no trouble with any color but the black. :(


 Works better now
Reviewed by Kim Meek 9/27/2013 10:45:00 AM

I have purchased this before in the white and always had trouble weeding it. It would take me hours sitting there picking at it and it would come up off the backing. I recently bought some more and it weeded great. I didn't even have to be careful with it. The backing was more tacky. Did it change?


 Works for us!
Reviewed by Julie 8/22/2013 7:23:52 PM

After reading other people who had difficulty weeding, we were a bit concerned. However, none of the reviewers said how small and detailed of a graphic they were trying to cut & weed. We limited ours to letters that were about 1/2" and had to be careful when weeding. 1" letters or larger would be much easier. But we have a lot of practice in cutting sign graphics, so we know that less than 1/2" letters are difficult under the best circumstances. If your cutter is not set up right, you will struggle.


 Hard to weed!!!! Depends on color
Reviewed by marie 8/19/2013 1:40:16 PM

This stuff su*ks. It all depends on what color you ordered. The ice blue and silver fall right of the backing when trying to weed no matter what your doing. The florescent green works great but if the backing isn't sticky when you buy it send it back. I've had a hell of a time trying to deal with this product. So frustrated.


 Success!!!
Reviewed by Jayne monsipapa 7/3/2013 10:23:24 PM

Out of frustration I called Ioline to find out why my 300 will not cut this product. All I needed was their vinyl holder and I used a 60 degree blade along with light tack adhesive and cuts like a dream. Russ at Ioline is the best. I have been told I needed a Roland to cut the premium. And cut black which I could not weed at all before. Very happy.


 Nightmare to Weed
Reviewed by Jayne Monsipapa 6/26/2013 8:08:39 PM

I have an Ioline 300 and I have never had a problem until I tried to use the Premium Plus. If you have a nice size letter it works great, but a smaller letter, forget it. I fought and fought with it, got out the Sports Vinyl and no problem at all. Using the Ioline 45 degree blade.


 NO PROBLEM!
Reviewed by Raymond Marrero 5/22/2013 9:13:18 PM

I had no problem cutting, weeding, pressing this vinyl. I have a UScutter sc plotter put the force on 70g, speed on 300mm, offset at .250 and it cut great. The weeding was very easy so was the pressing just 12 seconds. I will be ordering other colors cause I love how it feels. Thanks


 Should Highlight The Need For A Special Blade
Reviewed by Juanita Lee 5/22/2013 2:42:15 PM

This material was a nightmare to cut. I only have a basic cutter and it didn't even score through the paper. Stahls should highlight the need for their blade to cut this product. I've tried other papers and they all cut great. Wish I had known before purchasing. If anyone wants to trade 4.5 yds premium plus for some thermofilm please contact me I'm in NC abovefashions@nc.rr.com.


 Hate it!
Reviewed by Nicole 5/14/2013 10:53:35 AM

The color selection is great, so sometimes I have to order premium plus. I hate it. I have a Ioline 300 and an Ioline 301 it cuts and weeds terribly on both machines. I do $10-$15K a year with stahls... Never had a problem with anything but this product.


 Great product
Reviewed by Lisa 3/3/2013 1:26:02 PM

I am new to vinyl but so far I am very impressed with this product. It is very soft and I think the weeding is easy. The problems have come with my cutting machine and getting the cut on the right setting. I am curious how long it will last through wash cycles. For those who have used this, is it fairly durable?


 What's all the problem people are having with this?
Reviewed by Kevin Kneeland 2/27/2013 11:17:41 AM

I'm a complete newbie to vinyl. I got the roll from the ups truck. Put it on my hobby type vinyl express R-31, set up offset speed and tweaked my pressure. Easy cut, easy weed, nice feel.


 Great product but Tricky stuff to work with
Reviewed by Ray 2/21/2013 4:03:19 AM

I did try the Flex-Cut from Rtape before trying this similar product. Flex-cut is expensive but its less hassle when cutting and weeding. Hopefully my review will save you some time/money:) 1. Product looks/feels great when cut correctly 2. Less detail in your design the better you will be. 3. If you are cutting Times font make sure to beef it up a few points or any thin font for that matter. 3. Try to stay away from sharp edges, round them off if you have too. You will notice a big difference when cutting/weeding. 4. Brand new blade works best but you guys already knew that. 5. A stickier carrier would maybe better. I don't work for Stahls or Rtape but if you tried this and you didn't like it, you should try flex-cut it is pricey but maybe it will work for you. I will def buy more in other colors love the feel and its great for On Demand Designs that customers want.


 Not as bad as reviewed
Reviewed by Andrew 2/13/2013 8:05:58 PM

I bought 3 rolls of premium plus and i later seen reviewed saying that it was horrible to weed and difficult to weed.I have a cheap vinyl cutter and i cut out a few dozen designs and it weeded perfectly. All i did was perform a few test cuts and adjusted my down force accordingly until it was perfect.


 great hand but TERRIBLE TO WEED!!!!
Reviewed by Brandon C 2/7/2013 3:01:05 AM

This is the hardest heat transfer material to weed I have used. Be careful when purchasing this product. The finish on the garment is excellent. I just wish they would make some tackier backing to eliminate design damage during weeding. It might be OK on a Roland plotter but I have not made the big purchase yet. I might send all 6 of my rolls back actually?


 feels great, but thats about it
Reviewed by Josh 1/7/2013 10:23:54 PM

This is a really great product if you're looking for an extremely light feel on a t shirt, but be prepared to cut a design a couple of times because this stuff sucks to weed and black seems to be even worse. I have bought the carbide blades that are recommended and they do worse than a cheap blade when trying to cut this stuff in my opinion. Carrier needs to have a little bit of tackiness just to help hold the vinyl still while cutting so the corners can actually get cut all the way.


 Great on cottons, not so much on polys
Reviewed by Dennis 11/18/2012 5:55:17 PM

I haven't cut very fine details, but have never had the problems I read here. Works/feels great on cotton/poly tees, but DO NOT use on 100% polyester stuff. It peeled right off after 1-2 washes.


 Horrible!
Reviewed by 5roundTees 11/6/2012 1:38:17 PM

Played with the setting and total waste of time. Can't believe they sell this stuff and called it Premium Plus. When I rent a car and I get a Premium vehicle, I expect a much better than compact! What a joke.


 Great color, great feel Nightmare to weed
Reviewed by Michael Fleege 7/10/2012 3:18:49 AM

When I first heard of this product I was very excited and ordered several rools due to the promotional video on youtube. the color of the product is very vivid and the feel and streach of the final product is great you can hardly tell it is there, the problem is that when cutting the film my cutter would catch on the film and cut in dotted lines or leave areas still attached. also do to the low tack carrier if you make a mistake you cannot replace the vinyl. This product works great if you are doing large designs but for anything detailed this is not the film you want.


 This product is just OK
Reviewed by Lorenzo 6/15/2012 9:01:30 PM

I ordered this product to use on a basic three letter t-shirt project. because of the product description thought it would be simple and easy, but I found it to be the opposite. The cut lines are BARELY visible and weeding 3 letters is almost a nightmare. After stretching some areas to get them weeded out the letter no longer sticks to the carrier and curls up.... Aside of that the feel of the finish after applied deserves 5 STARS. I feel with a few tweaks to the carrier the product will be much better!


 Not so tough!
Reviewed by Chris Noble 5/28/2012 3:44:00 PM

I've read the reviews and after getting some sample material some of the complaints are justified ( the carrier needs more tack for sure), but I found a way to work with it. First things first, ignore the procedures called for by Stahls, I'm using a Roland GX-24 with a 45° blade and found that if I extend the blade to the lowest amount possible it helps a great deal. This stuff isn't very thick (Forget the 1 mm setting in the Roland manual, you're just asking for trouble) seriously I can barely see the tip of the blade protruding from the blade holder. Now for the force, I set mine between 140-200! forget the wimpy settings, make it scream! LOL Next I slow it down, Speed is set to 20 cm. I also increased my offset to .300. I cut some fairly detailed designs and found this to work well. So don't be too hard on this product it can be done, it has a nice feel and the price is nice.


 Very disappointed
Reviewed by Kmcgee 4/27/2012 1:41:21 PM

This sounded like such a great product, so I bought a bunch. Mistake! It cuts more like perforations for some reason so it just rips when I try to weed it. I've tried everything to get it to work. I was able to cut one large graphic and I liked the feel of it, but not sure I liked the matte look - in the black color anyway. Bottom line, I won't be buying Premium Plus again. I love all the other Stahls' products so there's lots more for me to choose from.


 difficult to weed
Reviewed by becky nelms 4/5/2012 10:54:36 AM

I will never buy this product again unless it is pre cut and weeded. Yes, the final product could be great if you can actually get it weeded without damaging the product. Everything was done per specifications and everything pulled and stretched when trying to weed. Doesn't matter end result of texture if you can't weed it.


 Premium Plus
Reviewed by Steve Ferroni 3/20/2012 12:14:09 AM

Best material I have ever used. I was a big user of Thermal Film but have since converted to Premium Plus. Easy to cut, great price, easy to weed, great feel on garment and very thin make it the best material Stahls has to offer.


 Cutting with Laser works great
Reviewed by Ripley 9/24/2011 9:22:59 PM

I like that the carrier is not tacky and it has great feel. I cut letters .25 inches and it weeds just fine when using our laser.


 Difficult to cut and weed
Reviewed by George 9/23/2011 7:23:37 PM

Carrier is not tacky enough maybe if the carrier was a little thicker it would help from sliding off or bending. Its hard to cut small letters even if i go slow is still cant figure out. I really like the feel i wish they can fix this issues.


 Carrier need to be more tacky!
Reviewed by Pranee 9/17/2011 12:29:35 AM

I really like this product a lot..but when I wanna do fine details I can't because the carrier isn't tacky like the Fashion-Film..which the carrier should be like Fashion-Film carrier..if it was then no doubt this will be the best product ever...but I love the feel of this better then Fashion-Film.


 Don't Bother unless you're using it for Numbering
Reviewed by Giovanni Sabido 9/10/2011 6:36:31 PM

Cutting and Weeding a nightmare don't bother unless you're using it for numbering or large block lettering other than that use a different product. End result feels great.


 Great "feel" but weeding can be difficult.
Reviewed by Glen Sutton 8/3/2011 4:07:37 PM

My customers, family, and myself love the feel of this material. However, I have moments where weeding has been way too difficult. Small lettering at times lifts completely off and will not stay back on the carrier. We have to know the limitations of this material and the ebst setting with our cutter. Also I have some problems with the material getting bunched up in my cutter but have worked that out after several adjustments. There are various variables in order to get good cuts and weeding. I have a GCC Expert 24 and found that about a 70 on downforce, 30 speed, and blade assembly set to the lowest set to number 1, and making sure the rollers are far enough in so that the material doesn't bunch and crinkle. After adjusting it works pretty good but nothing I don't think is going to be fool proof with it. I think the biggest thing they could do is make the carrier a bit more sticky. If one eliminates small lettering and intricate design then this material works pretty well.


 Tricky Cutting
Reviewed by Jerry 8/2/2011 1:11:21 PM

Great end results. Nice feel and applies well. Rubberiness of product seems to make cutting a bit difficult and since the carry sheet isn't tacky it pulls in some spots without cutting and makes weeding a bit difficult. Especially of finer detail. Still experimenting to find the right cutting pressure and depth since I don't have a Roland.


Review this product.

1. Contact Information:

Name
Company
Email

2. Rate this item:

3. Title for your review:

4. Write your review:

SUBMITRESET
Overview

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...