CAD-CUT® Heat Press Adhesive
For long-lasting foil embellishments.
Heat transfer foils are known for being short-term embellishments when added to transfer papers and plastisol inks. This heat transfer foil adhesive solves that problem, permanently binding the foil, giving foil-embellished designs a long life. Laser cutter compatible.
Use with Stahls' Heat Transfer Foil, available in 14 new colours, to create eye-catching designs.
Shop Foil Now
Shop Foil Now
Save a step with CAD-CUT® Templates.
Create a design from our library of templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive.
Create a design from our library of templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive.
- Easy, inexpensive way to create high-end fashion wear
- No need to screen print a base layer for foil - just cut, apply, and foil
- Arrives on a carrier for use with your vinyl cutter
- Handles fine detail for intricate foil embellishments
- Available in 20" and 11.8" (the same width as most heat transfer foils) rolls
- CPSIA Compliant
roll over image to zoom
Order Now
User Guide
Overview
Adhesive Application
Time
3-5 seconds
Temperature
300°F/149°C
Pressure
Light (20 psi)
Peel
Hot
Foil Application
Place foil:
Make sure design is completely covered
Cover:
Place cover sheet over design
Time:
8-10 seconds
Temperature:
300°F/149°C
Pressure:
Firm (60-70 psi)
Important:
Allow foil to cool completely before removing
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| Roland GS-24 | 45° Premium Carbide | 60 gf | .225 | 20 cm/s |
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favourites
You already have 10 favourites.
Remove one to add this one.
Adding Favourite...
