Internet Explorer is no longer supported. We recommend upgrading to Chrome, Firefox, Safari, or Microsoft Edge browser.
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
https://assets.stahls.com/stahls/content/images/products/premium-plus-prod-image-01_small.webp
Product Quick Look
Quick Look

Benefits:

  • Best heat transfer vinyl for performance wear
  • Applies at a low temp
  • High stretch and rebound

Available In:

20" Wide Rolls
High Tack & Low Tack
CAD-CUT® Premium Plus™ Heat Transfer Vinyl

CAD-CUT® Premium Plus™ Heat Transfer Vinyl

The softest HTV built for performance

Order Now

Open this ordering wizard full window

Limited Edition Premium Plus™ Low Tack Colours Now 25% Off!!
Premium Plus™ Low Tack is being discontinued. Order now while supplies last!
Details

Material Overview

With superior stretch and rebound, Premium Plus™ was designed to keep up with the most strenuous movements while retaining its original shape. This low-temp material is the ideal choice when decorating heat-sensitive performance wear, and once heat applied has an extremely soft and lightweight feel.
  • Thin, soft & durable
  • Silky matte finish
  • Choose low tack for larger designs
  • Choose high tack for detailed designs
  • Order online and save 2%, discount is applied automatically
Also available in: Pre-Cut Letters and Numbers

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Low Tack Thickness: 80-108 microns/.080-108mm
  • High Tack Thickness: 92 microns/.092mm
  • Stretch & Rebound: 5
  • Washability: 50
  • Safety: Low Tack CPSIA Certified, High Tack CPSIA Certified
  • Laser cutter compatible
Premium Plus High Tack weeding works best when in conjunction with weeding panel or weeding table.
User Guide

CAD-CUT® Premium Plus™ Heat Transfer Vinyl

Application Instructions

Low Tack Application Instructions

Time:
8-12 Seconds
Temperature:
280-300°F/138-149°C
Pressure:
Medium
Peel:
Warm or Cold
Two-Colour:
Tack background 2 seconds, peel warm, place foreground on top, 8 seconds

High Tack Application Instructions

Time:
8-12 Seconds
Temp:
280-300°F/138-149°C
Pressure:
Medium
Peel:
Hot
Two-Colour:
5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds

Heated Lower Platen - 100% Polyester

Time:
10 seconds
Upper:
270°F
Lower:
320°F
Pressure:
60 psi (#6/Medium on Hotronix)
Peel:
Warm for Low Tack; Hot for High Tack

Heated Lower Platen - 95% Polyester / 5% Spandex / Triblends

Time:
30 seconds
Upper:
270°F
Lower:
290°F
Pressure:
60 psi (#6/Medium on Hotronix)

Hotronix® 360 IQ™ Hat Press (High Tack Only)

Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:

Special Notes

Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material/Fabric Compatibility

Cutter Guidelines

Cutter
Blade
Force
Offset
Speed
Graphtec
45°
9-11
0
20cm/s
Roland GS-24
45°
90-110g
.25
20cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Videos

How to Heat Press: CAD-CUT® Premium Plus™

2021-07-27T20:00:05Z

Learn the step-by-step instructions of how to properly heat press CAD-CUT® Premium Plus™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure. To order CAD-CUT® Premium Plus™ today simply click the link here https://bit.ly/3wgrRzy

Top 3 Reasons To Buy: CAD-CUT® Premium Plus™

2021-04-16T17:15:00Z

Learn about one of the softest heat transfer vinyl on the market in CAD-CUT® Premium Plus™. This heat transfer material is great for performance wear due to its incredible stretch, low-temperature application, and lightweight feel. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-CUT® Premium Plus™ today simply click the link here https://bit.ly/3fVcmbd