CAD-CUT® Reflective Heat Transfer Vinyl

Increase visibility in low-light conditions.

  • Reflective heat transfer material is thin, economical with a reflective finish
  • Available in silver only
  • Compliant with some ANSI safety standards.
  • Can be used as a foreground only in multi-layer applications
  • Order online and save 2%, discount is applied automatically
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure-Sensitive
  • Thickness: 110 microns (.11 mm)
  • Stretch & Rebound: 2
  • Washability: 50
  • Safety: ANSI Certified, CPSIA Certified
Order Now
User Guide

1-Colour Application Instructions

Time: Tack 2 seconds, peel warm, cover and seal 15 seconds
Temperature: 330°F/165°C
Pressure: Medium
Peel: Warm

2-Colour Application Instructions

Background: Apply for 2 seconds, peel hot
Foreground: Apply for 2 seconds, peel hot
Final Application: Cover with Kraft paper and apply for 15 seconds
Temperature: 330°F/165°C
Pressure: Medium

Material/Fabric Compatibility

  • 100% Cotton
  • 100% Preshrunk Cotton
  • 100% Polyester
  • Cotton/Poly Blends
  • Nylon
  • Cordura®

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Print Application Instructions

Material Combination Instructions

Select foreground material:
Select background material:

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
GCC 45°/60° 100-150g/120-150g.25 / .3015 - 35 cm/s
Graphtec 45° 11121
Ioline 100 45° 100g .1512:30
Ioline 300 30° 85g .1512:15
Roland GX-24 45° / 60° 100-150g / 120-150g .25 / .30 15 - 35 cm/s
Note: Be sure to remove the material's liner before cutting. Failure to remove the pink plastic liner may result in a damaged blade.
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Average Customer Rating

(based on 1 reviews)
 Was ok
Reviewed by Q 10/4/2016 3:20:19 PM

Used it for the first time a little while ago for a client and got great reviews. I personally think it is a lot of fun to work with.

Review this product.

1. Contact Information:


2. Rate this item:

3. Title for your review:

4. Write your review:


Most Popular Videos

View All Videos >

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...