CAD-CUT® GORILLA GRIP® II Heat Transfer Vinyl
Best choice to heat print on nylons.
Ideal for decorating equipment bags and jackets, GORILLA GRIP vinyl adheres to difficult fabrics such as tightly woven nylons, oxfords, satin, crinkle, and rip stop nylon.
15" Rolls in limited quantities available up to 45% off. Clearance pricing shown.
All clearance items are final sale and cannot be returned.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Non-Pressure-Sensitive
- Thickness: 80 microns (.08 mm)
- Stretch & Rebound: 3
- Washability: 50
- Safety: CPSIA Certified
roll over image to zoom
Order Now
User Guide
Overview
1-Colour Application Instructions
Time:
Tack 2 seconds, peel cold, cover and seal 10 secs
Temperature:
320°F/160°C
Pressure:
Light
Peel:
Cold
2-Colour Application Instructions
Background:
Apply for 2 seconds, peel cold
Foreground:
Apply for 2 seconds, peel cold
Final Application:
Cover with Kraft paper, apply for 10 seconds
Temperature:
320°F/160°C
Pressure:
Light
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material Combination Instructions
Select foreground material:
Select background material:
Cutter Guidelines
Cutter | Blade | Force | Offset | Speed |
GCC | 45°/60° | 80-100g / 100-150g | .30 / .25 | 25 - 50 cm/s |
Graphtec | 45° | 10 | 0 | 35 |
Ioline 100 | 45° | 150g | .15 | 12:30 |
Ioline 300 | 30° | 100g | .15 | 12:15 |
Roland GX-24 | 45°/60° | 80-100g / 100-150g | .30 / .25 | 25 - 50 cm/s |
Before cutting, remove pink liner from the adhesive side of the material.
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favourites
You already have 10 favourites.
Remove one to add this one.
Adding Favourite...
