CAD-CUT® Metallic Heat Transfer Vinyl
Foil-like finish with a soft feel.
Add a higher-perceived value to designs with Metallic Vinyl. This 1-step application gives the look of Foil with an incredibly soft feel.
Material Specifications
- Composition: Polyurethane
- Carrier: Pressure-Sensitive
- Thickness: 63 microns (.063 mm)
- Washability: 50
- Safety: CPSIA Certified
roll over image to zoom
Order Now
User Guide
Overview
1-Colour Application Instructions
Time:
8-10 seconds
Temperature:
285°F/140°C
Pressure:
Medium
Peel:
Cold
Care Instructions
Machine wash cold, inside-out, using mild detergent on delicate setting.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash cold, inside-out, using mild detergent on delicate setting.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material Combination Instructions
Select foreground material:
Select background material:
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| Roland | 45° | 90g | .35 | 35 cm/s |
| Graphtec | 45° | 9 | 30 | 30 |
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favourites
You already have 10 favourites.
Remove one to add this one.
Adding Favourite...
