https://assets.stahls.com/stahls/content/images/products/Premium-Plus-Heat-Transfer-Vinyl_small.jpg

NEW CAD-CUT® Premium Plus™ Heat Transfer Vinyl

Premium heat transfer vinyl with high and low-tack options.

With superior stretch and rebound, this low-temp HTV is a great choice for application to performance wear. It can be applied at temperatures as low as 280°, meaning heat-sensitive fabrics like spandex can be decorated without fear of scorching.
  • Applies at a low temp to prevent scorching on heat-sensitive items
  • Soft & Stretchable
  • Silky matte finish
  • Choose low tack for larger designs, high tack for more detailed designs
  • High tack peels hot for quick production and no distortion of design on stretchy fabrics
  • New range of bright colours
  • Laser cutter compatible
  • Available in Pre-Cut Letters and Numbers
  • Order online and save 5%, discount is applied automatically
Remaining original colours of Premium Plus are available while supplies last on the Premium Plus clearance page

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Thickness:
    Low Tack: 80-108 microns/.080-108mm
    High Tack: 92 microns/.092mm
  • Stretch & Rebound: 5
  • Washability: 50
  • Safety: CPSIA Certified
Premium Plus High Tack weeding works best when in conjunction with weeding panel or weeding table.
Order Now
User Guide

Low Tack Application Instructions

Time: 8-12 Seconds
Temperature: 280-300°F/138-149°C
Pressure: Medium
Peel: Warm or Cold
Two-Colour Tack background 2 seconds, peel warm, place foreground on top, 8 seconds
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

High Tack Application Instructions

Time: 8-12 Seconds
Temp: 280-300°F/138-149°C
Pressure: Medium
Peel: Hot
Two-Colour 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

Heated Lower Platen Application - 100% Polyester

Lower Platen: 320°F
Upper Platen: 270°F
Time: 10 seconds (depending on thickness of garment)
Pressure: 60 psi (#6/Medium on Hotronix machines)
Peel: Warm for Low Tack; Hot for High Tack
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen = 290°
Upper Platen = 270°
Time = 30 secs
Pressure = 60 psi (#6/Medium on Hotronix®)
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

  

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Graphtec (Low Tack) 45° 11135
Graphtec (High Tack) 45° 10.3 mm64 cm/s
Roland GS-24 45° 60-70g.2525 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...