https://assets.stahls.com/stahls/content/images/products/Thermo-FILM-heat-transfer-vinyl-hero_small.jpg

CAD-CUT® Thermo-FILM® Heat Transfer Vinyl

#1 Choice for full-contact sports.

With its low-bleed formula and superior opacity, Thermo-FILM® vinyl is a great choice for resisting dye migration on polyester garments. Whites stay white and team colours stay true.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Clear, Pressure-Sensitive
  • Thickness: 190 microns/.19mm
  • Stretch & Rebound: 2
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Colour Application Instructions

Time: 6-8 seconds
Temp: 330°F / 165°C
Pressure: Medium
Peel: Hot

2-Colour Application Instructions

Time: Tack background 2 seconds, peel hot, place foreground on top, 10 seconds
Temp: 330°F / 165°C
Pressure: Medium
Peel: Hot

Heated Lower Platen - 100% Polyester

Lower Platen: 320°F
Upper Platen: 270°F
Time: 10 seconds
Pressure: 60 psi (#6/Medium on Hotronix® machines)
Peel: Hot
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen = 290°
Upper Platen = 270°
Time = 30 secs
Pressure = 60 psi (#6/Medium on Hotronix®)
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:
  

Cutter Instructions

Cutter Blade ForceOffsetSpeed
GCC 45° / 60 120-160g / 140-170g .25 / .50 15 - 50cm/s
Graphtec 45° 19150
Roland 45° / 60 120-160g / 140-170g .25 / .50 15 - 50cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...