https://assets.stahls.com/stahls/content/images/products/Hi-Vis-Color-Reflect-Cycle_small.jpg

CAD-CUT® Hi-Vis Colour Reflect Heat Transfer Vinyl

Bright colours. High visibility. Unique looks.

Capitalize on the reflective trend with this high-colour, high-visibility reflective material for fashion, street, and sportswear. Colours are created for maximum reflectivity by utilizing industry-leading 3M™ Scotchlite™ Reflective as the base material.
  • 300 candle power retroreflectivity
  • Easy to cut and weed
  • PVC-free - Can be cut using a laser cutter
  • Not recommended for use as a background layer

Material Specifications

  • Carrier: Pressure-Sensitive
  • Thickness: 151 microns (.151 mm)

View Pantone Colour Chart
Hi-Vis Color Reflect is protected by U.S. Patent No: 9,248,470 B2 (other US and worldwide patents pending)
Order Now
User Guide

Application Instructions

Time: 20 seconds
Temperature: 325-350°F / 163-177°C
Pressure: Medium (30-40 psi)
Peel: Cold

Heated Lower Platen Application to 100% Polyester

Lower Platen: 320°
Upper Platen: 270°
Time: 10 seconds
Pressure: 60 psi (#6/Medium on Hotronix® machines)
Peel: Cold
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

Heated Lower Platen Application to 95% Polyester / 5% Spandex / Triblends

Lower Platen: 290°
Upper Platen: 270°
Time: 30 seconds
Pressure: 60 psi (#6/Medium on Hotronix® machines)
Peel: Cold

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

  

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Graphtec 45° Standard 130 mm25 cm/s
Roland GS-24 45° 130-140.02540 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...