CAD-COLOUR® FlockPrint™ Printable Heat Transfer Material
Printable flock material for decorating sports uniforms.
Material Specifications
- Composition: Polyvinyl Chloride (PVC)
- Carrier: Clear, Non-Pressure Sensitive
- Thickness: 430 microns (.43 mm)
- Stretch & Rebound: 1
- Dry Time: 2-4 hours
roll over image to zoom
Order Now
User Guide
Overview
1-Colour Application Instructions
Time:
15 seconds
Temperature:
350°F/177°C
Pressure:
Medium
Peel:
Hot
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| Roland VP-300 | 45° | 85-100 | .25 | 30cm/s |
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favourites
You already have 10 favourites.
Remove one to add this one.
Adding Favourite...
