CAD-COLOUR® SuperTEK® Opaque Printable Heat Transfer Material
Stunning full colour designs on light or dark fabrics.
Create vibrant transfers for dark garments with this opaque vinyl film. With excellent stretch and rebound and a low application temperature, it's perfect for stretchy, heat-sensitive performance fabrics.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Non-Pressure Sensitive
- Thickness: 100 microns (.10 mm)
- Stretch & Rebound: 4
- Washability: 50
- Colour Fastness: 4-5
- Dry Time: 30-60 minutes
- Safety:
roll over image to zoom
Order Now
User Guide
Overview
1-Colour Application Instructions
Time:
Tack for 5 seconds, peel warm and cover and seal 5 seconds.
Temperature:
280-300°F/ 138-150°C
Pressure:
Medium (#6 on Hotronix)
Peel:
Warm
Sports Ball Heat Press Application Instructions
Time:
8 seconds
Temperature:
230°F/110°C
Pressure:
Firm (top platen should make contact with the ball 2 inches before final lockdown)
Peel:
Cool
Note:
For textured balls, remove carrier and heat apply for an additional 8 seconds.
Heated Lower Platen Application
Lower Platen:
320°F
Upper Platen:
250°F
Time:
12-15 seconds (depending on thickness of garment)
Pressure:
Medium
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| Roland® GX-24 | 45° | 80-90g | .25 | 30cm/s |
| Roland® VP-300 | 45° | 80-90g | .25 | 30cm/s |
| Roland® SP-300 | 45° | 80-90g | .25 | 30cm/s |
| Roland® XC-540 | 45° | 80-90g | .25 | 30cm/s |
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favourites
You already have 10 favourites.
Remove one to add this one.
Adding Favourite...
