CAD-COLOUR® SuperTEK® Sublistop™ Printable Heat Transfer Vinyl

Inhibits bleed-through.

  • Inhibits dye migration
  • Semi-matte finish
  • Lightweight, with a soft hand
  • Excellent stretch and rebound
  • Designed to apply to performance fabrics without scorching or burning
  • ONYX STiX2™ adhesive with charcoal-based lining inhibits sublimated dyes from bleeding through
  • Recommended mask: Solutions® Mask
  • Order online and save 5%, discount is applied automatically
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 120 microns (.12 mm)
  • Stretch & Rebound: 4
  • Washability: 50
  • Colour Fastness: 4-5
  • Dry Time: 30-60 minutes
  • Safety:CPSIA Certified
Order Now
User Guide

1-Colour Application Instructions

Time: Tack for 5 seconds, peel warm, cover and seal 5 seconds.
Temperature: 280-300°F/ 138-150°C
Pressure: Medium (#6 on Hotronix)

Heated Lower Platen

Lower Platen: 320°F
Upper Platen: 250°F
Time: 12-15 seconds (depending on thickness of garment)
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Print Application Instructions

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland® GX-24 45° 80-90g.25 30cm/s
Roland® VP-300 45° 80-90g.25 30cm/s
Roland® SP-300 45° 80-90g.25 30cm/s
Roland® XC-540 45° 80-90g.25 30cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Customer Reviews

Average Customer Rating
(based on 6 reviews)
 Soft feel
Reviewed by Patrick 11/24/2017 8:45:06 AM

Work really well very soft feel no complaints from customers they love it, so I love it been using it for about a year

 Does not work on 100% cotton
Reviewed by Andre 2/16/2017 3:30:02 PM

We have used this material for a few projects with success. Polyester fabric. However it is rated for cotton but does not work at all. The transfer peels right off after the first wash. I am waiting for Stahls to review the samples I have sent in. I followed instructions to the T, even calibrated my heat press after the first failed attempt.

 Another great material
Reviewed by David Henry 9/17/2016 2:11:12 AM

I've had my BN-20 for 3 years, started using SubliStop for more than a year. The colors have been great and lasting, love the stretch factor too. I have test shirts of my own with more than 30+ washings, testing conducted purposely incorrectly (hot wash, right-side out, high heat drying, etc.) all still great. Customers, not a single complaint.

 does not cut well
Reviewed by Diane 5/6/2016 3:42:06 PM

Even with the appropriate pressure on blades, the material is hard to cut. The cut line is perforated in lieu of solid cuts.

 great results / not for any printer!!
Reviewed by Caroline 8/19/2014 3:01:28 PM

as the carrier is frosted clear the black surface is not seen on every printer!! I had to put a white vinyl strip on back to make my printer detect it. Once it was done... OMG! I cut very complex lines and small details, opaque white on the plaid shirts, easy weeding, bright colors... amazing! unfortunately, I will reorder it only if it comes with a white carrier...

 didn't work
Reviewed by mark 8/18/2014 3:05:28 PM

I did camo shirts for a team and followed directions the whole way and #s STILL ended up with bleed through....not worth extra cost, Very frustrated

Review this product.

* Required Fields

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...