Please expect potential shipping delays with express timelines when using UPS or Purolator
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
https://assets.stahls.com/stahls/content/images/products/sid-printable-soft-foam-prod-img3_small.jpg
Product Quick Look
Quick Look

Benefits:

  • Slightly raised look
  • Ultra-matte finish
  • Soft, muted colors

Available In:

20" Wide Rolls
CAD-COLOUR® Soft Foam Printable Heat Transfer Vinyl

CAD-COLOUR® Soft Foam Printable Heat Transfer Vinyl

Create full colour dimensional designs with this printable HTV

Order Now

Open this ordering wizard full window

Details

Material Overview

Use your print/cut system to create unique designs that add a raised effect to any item you’re decorating. With its smooth, velvet-like texture, Soft Foam is perfect for creating premium looks for everyday fashion, spirit wear, athletics, and more. Due to the porous texture of the material, printed designs will have a matte finish with soft, muted colours.
  • Specialty printable HTV with a slightly raised look
  • Soft, muted, ultra-matte finish
  • Not recommended for finely detailed designs
  • For solvent inks using a print/cut system only—not compatible with inkjet/laser printer
  • Recommended mask: Medium Tack Magic Mask®
  • Soft Foam is available as full colour pre-printed patterned rolls in CAD-CUT® Patterns

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Polyester, Non-Pressure Sensitive
  • Thickness: 0.59 mm
  • Stretch & Rebound: 1
  • Colour Fastness: 4-5
  • Washability: 50
  • Dry Time: 2-4 hours
  • Safety: PVC free and CPSIA Certified
User Guide

CAD-COLOUR® Soft Foam Printable Heat Transfer Vinyl

Application Instructions

1-Colour Application Instructions

Time:
15 seconds
Temperature:
302°F/150°C
Pressure:
45psi (3 to 4)
Peel:
Hot

Print/Cut Instructions

  1. Print and cut your design in positive form on the media side of the material
  2. Once dry, weed away excess material
  3. Mask the weeded design, smoothing out any air bubbles
  4. Lift the mask to expose the vinyl adhesive from the backing
  5. Position the masked design on the garment for heat application

Material/Fabric Compatibility

Care Instructions

Machine wash cold inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in room temperature around 68 degrees Fahrenheit with low humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter
Blade
Force
Offset
Speed
Graphtec CE6000-60
45°
14
0
25mm/s
Roland GS-24
60°
160
0
25mm/s
Craft Cutter
Setting
Blade
Force
Speed
Cricut
Light Cardstock +
Fine-point Blade
287
N/A
Silhouette
Heat Transfer Flocked
9
33
5
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.