https://assets.stahls.com/stahls/content/images/products/CClr-TEK-Gloss1_small.jpg

CAD-COLOUR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl

Create a high gloss finish.

With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
  • Lightweight, stretchable, incredibly soft hand
  • Gloss finish
  • Low application temperature - safe for sensitive materials
  • Apply on another material for tone-on-tone "liquid glass" look
  • For white or light fabrics only
  • Mask is not needed
  • Order online and save 5%, discount is applied automatically

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 50 microns (.05 mm)
  • Stretch & Rebound: 5
  • Washability: 50
  • Colour Fastness: 4-5
  • Dry Time: 30-60 minutes
  • Safety:CPSIA Certified
Tip: Protect heat-sensitive garments from imprints and scorching with a Silicone Upper Platen Cover.
Order Now
User Guide

1-Colour Application Instructions

Time: Tack for 5 seconds, peel cold, cover and seal 5 seconds.
Temperature: 280-300°F/ 138-150°C
Pressure: Medium (#6 on Hotronix)

Heated Lower Platen Application

Lower Platen: 320°F
Upper Platen: 250°F
Time: 12-15 seconds (depending on thickness of garment)
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

  

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland® GX-24 45° 80-90g.25 30cm/s
Roland® VP-300 45° 80-90g .25 30cm/s
Roland® SP-300 45° 80-90g .25 30cm/s
Roland® XC-540 45° 80-90g .25 30cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Log in or register to start creating a list of Your Favourites

You already have 10 favourites.
Remove one to add this one.

Adding Favourite...