Home |

CAD-COLOUR® SuperTEK® Sublistop™ Printable Heat Transfer Vinyl

Inhibits bleed-through.

Keep transfers vibrant and true to their original colours with SuperTEK Sublistop. Its charcoal-based adhesive inhibits dye migration on sublimated and brightly-coloured polyester garments. Plus, its low application temperature helps you avoid scorching and burning heat-sensitive garments.

Inhibits dye migration
Semi-matte finish
Lightweight, with a soft hand
Excellent stretch and rebound
Designed to apply to performance fabrics without scorching or burning
ONYX STiX²™ adhesive with charcoal-based lining inhibits sublimated dyes from bleeding through
Recommended mask: Solutions® Mask
Order online and save 5%, discount is applied automatically

Material Specifications

Composition: Polyurethane (PU)
Carrier: Frosted, Non-Pressure Sensitive
Thickness: 120 microns (.12 mm)
Stretch & Rebound: 4
Washability: 50
Colour Fastness: 4-5
Dry Time: 30-60 minutes
Safety: CPSIA Certified

We recommend COLD wash only for this product.

Download the VersaCAMM® print profile for your machine

roll over image to zoom

view image details

Order Now
User Guide

Order Now

User Guide

1-Colour Application Instructions

Time: Tack for 5 seconds, peel warm, cover and seal 5 seconds.

Temperature: 280-300°F/ 138-150°C

Pressure: Medium (#6 on Hotronix)

Heated Lower Platen Application

Lower Platen: 320°F

Upper Platen: 250°F

Time: 12-15 seconds (depending on thickness of garment)

Pressure: Medium

Care Instructions
We recommend COLD wash only for this product.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter	Blade	Force	Offset	Speed
Roland® GX-24	45°	80-90g	.25	30cm/s
Roland® VP-300	45°	80-90g	.25	30cm/s
Roland® SP-300	45°	80-90g	.25	30cm/s
Roland® XC-540	45°	80-90g	.25	30cm/s

Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Overview